Since we no longer have to hold the RTNL lock here just do updates for
the specified queue.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The command VQ will no longer be protected by the RTNL lock. Use a
mutex to protect the control buffer header and the VQ.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allocate memory for the data when it's used. Ideally the struct could
be on the stack, but we can't DMA stack memory. With this change only
the header and status memory are shared between commands, which will
allow using a tighter lock than RTNL.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stop storing RSS setting in the control buffer. This is prep work for
removing RTNL lock protection of the control buffer.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the MT7530 DSA subdriver configures the MT7530 switch to provide
direct access to switch PHYs, meaning, the switch PHYs listen on the MDIO
bus the switch listens on. The PHY muxing feature makes use of this.
This is problematic as the PHY may be attached before the switch is
initialised, in which case, the PHY will fail to be attached.
Since commit 91374ba537 ("net: dsa: mt7530: support OF-based registration
of switch MDIO bus"), we can describe the switch PHYs on the MDIO bus of
the switch on the device tree. Extend the check to detect PHY muxing when
the PHY is defined on the MDIO bus of the switch on the device tree.
When the PHY is described this way, the switch will be initialised first,
then the switch MDIO bus will be registered. Only after these steps, the
PHY will be attached.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240430-b4-for-netnext-mt7530-use-switch-mdio-bus-for-phy-muxing-v2-1-9104d886d0db@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
All rtnl_link_ops->get_link_net() methods already using dev_net()
are ready. I added READ_ONCE() annotations on others.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When calling qede_flow_parse_ports(), then the
return code was only used for a non-zero check,
and then -EINVAL was returned.
qede_flow_parse_ports() can currently fail with:
* -EINVAL
This patch changes qede_flow_parse_v{4,6}_common() to
use the actual return code from qede_flow_parse_ports(),
so it's no longer assumed that all errors are -EINVAL.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When calling qede_flow_spec_validate_unused() then
the return code was only used for a non-zero check,
and then -EOPNOTSUPP was returned.
qede_flow_spec_validate_unused() can currently fail with:
* -EOPNOTSUPP
This patch changes qede_flow_spec_to_rule() to use the
actual return code from qede_flow_spec_validate_unused(),
so it's no longer assumed that all errors are -EOPNOTSUPP.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In qede_flow_spec_to_rule(), when calling
qede_parse_actions() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_actions() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
Commit 319a1d1947 ("flow_offload: check for
basic action hw stats type") broke the implicit
assumption that it could only fail with -EINVAL,
by changing it to return -EOPNOTSUPP, when hardware
stats are requested.
However AFAICT it's not possible to trigger
qede_parse_actions() to return -EOPNOTSUPP, when
called from qede_flow_spec_to_rule(), as hardware
stats can't be requested by ethtool_rx_flow_rule_create().
This patch changes qede_flow_spec_to_rule() to use
the actual return code from qede_parse_actions(),
so it's no longer assumed that all errors are -EINVAL.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* New driver for vGPIO controller on Intel Granite Rapids-D
* Update ACPI GPIO library to unify the IRQ code path
* Better GPIO IRQ line labeling for ACPI
* Switched Intel SCH driver to use "mapped" I/O accessors
The following is an automated git shortlog grouped by driver:
Add Intel Granite Rapids-D vGPIO driver:
- Add Intel Granite Rapids-D vGPIO driver
crystalcove:
- Use -ENOTSUPP consistently
gpiolib:
- acpi: Set label for IRQ only lines
- acpi: Add fwnode name to the GPIO interrupt label
- acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
- acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
- acpi: Simplify error handling in __acpi_find_gpio()
- acpi: Extract __acpi_find_gpio() helper
- acpi: Check for errors first in acpi_find_gpio()
- acpi: Remove never true check in acpi_get_gpiod_by_index()
sch:
- Utilise temporary variable for struct device
- Switch to memory mapped IO accessors
wcove:
- Use -ENOTSUPP consistently
-----BEGIN PGP SIGNATURE-----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=33sC
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.10-1
* New driver for vGPIO controller on Intel Granite Rapids-D
* Update ACPI GPIO library to unify the IRQ code path
* Better GPIO IRQ line labeling for ACPI
* Switched Intel SCH driver to use "mapped" I/O accessors
The following is an automated git shortlog grouped by driver:
Add Intel Granite Rapids-D vGPIO driver:
- Add Intel Granite Rapids-D vGPIO driver
crystalcove:
- Use -ENOTSUPP consistently
gpiolib:
- acpi: Set label for IRQ only lines
- acpi: Add fwnode name to the GPIO interrupt label
- acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
- acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
- acpi: Simplify error handling in __acpi_find_gpio()
- acpi: Extract __acpi_find_gpio() helper
- acpi: Check for errors first in acpi_find_gpio()
- acpi: Remove never true check in acpi_get_gpiod_by_index()
sch:
- Utilise temporary variable for struct device
- Switch to memory mapped IO accessors
wcove:
- Use -ENOTSUPP consistently
According to GCC, the constriction of irq_name in otx2_open()
may, theoretically, be truncated.
This patch takes the approach of treating such a situation as an error
which it detects by making use of the return value of snprintf, which is
the total number of bytes, excluding the trailing '\0', that would have
been written.
Based on the approach taken to a similar problem in
commit 54b909436e ("rtc: fix snprintf() checking in is_rtc_hctosys()")
Flagged by gcc-13 W=1 builds as:
.../otx2_pf.c:1933:58: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=]
1933 | snprintf(irq_name, NAME_SIZE, "%s-rxtx-%d", pf->netdev->name,
| ^
.../otx2_pf.c:1933:17: note: 'snprintf' output between 8 and 33 bytes into a destination of size 32
1933 | snprintf(irq_name, NAME_SIZE, "%s-rxtx-%d", pf->netdev->name,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1934 | qidx);
| ~~~~~
Compile tested only.
Tested-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240503-octeon2-pf-irq_name-truncation-v2-1-91099177b942@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new netdev queue api is implemented for gve.
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Link: https://lore.kernel.org/all/20240501232549.1327174-11-shailend@google.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This allows to define a GTP tunnel for dual stack MS/UE with both IPv4
and IPv6 addresses while using the same TEID via two PDP context
objects.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add new protocol field to PDP context that determines the transmit path
IP protocol to encapsulate the original packets, either IPv4 or IPv6.
Relax existing netlink attribute checks to allow to specify different
family in MS and peer attributes from the control plane.
Use build helpers to tx path to encapsulate IPv4-in-IPv6-GTP and
IPv6-in-IPv4-GTP according to the user-specified configuration.
From rx path, snoop for the inner protocol header since outer
skb->protocol might differ and use this to validate for valid PDP
context and to restore skb->protocol after decapsulation.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add routine to attach an IPv6 route for the encapsulated packet, deal
with Path MTU and push GTP header.
This helper function will be used to deal with IPv4-in-IPv6-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add routine to attach an IPv4 route for the encapsulated packet, deal
with Path MTU and push GTP header.
This helper function will be used to deal with IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Based on the idea that ip_tunnel_get_dsfield() provides the tos field
regardless the IP version, use either iph->tos or ipv6_get_dsfield().
This comes in preparation to support for IPv4-in-IPv6-GTP and
IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Move debugging to the routine to build GTP packets in preparation
for supporting IPv4-in-IPv6-GTP and IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
According to TS 29.061, it is possible to see IPv6 link-local traffic in
the GTP tunnel, see 11.2.1.3.2 IPv6 Stateless Address Autoconfiguration
(IPv6 SLAAC).
Pass up these packets to the userspace daemon to handle them as control
GTP traffic.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Harald Welte reports that according to 3GPP TS 29.060:
PDN Connection: the association between a MS represented by one IPv4
address and/or one IPv6 prefix and a PDN represented by an APN.
this clearly states that IPv4 is a single address while IPv6 is a single prefix.
Then, 3GPP TS 29.061, Section 11.2.1.3:
For APNs that are configured for IPv6 address allocation, the GGSN/P-GW
shall only use the Prefix part of the IPv6 address for forwarding of mobile
terminated IP packets. The size of the prefix shall be according to the maximum
prefix length for a global IPv6 address as specified in the IPv6 Addressing
Architecture, see RFC 4291 [82].
RFC 4291 section 2.5.4 states
All Global Unicast addresses other than those that start with binary 000
have a 64-bit interface ID field (i.e., n + m = 64) ...
3GPP TS 29.61 Section 11.2.1.3.2a:
In the procedure in the cases of using GTP-based S5/S8, P-GW acts as an
access router, and allocates to a UE a globally unique /64 IPv6 prefix if the
PLMN allocates the prefix.
Therefore, compare IPv6 address /64 prefix only since MS/UE is not a single
address like in the IPv4 case.
Reject IPv6 address with EADDRNOTAVAIL if it lower 64 bits of the IPv6 address
from the control plane are set.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add new iflink attributes to configure in-kernel UDP listener socket
address: IFLA_GTP_LOCAL and IFLA_GTP_LOCAL6. If none of these attributes
are specified, default is still to IPv4 INADDR_ANY for backward
compatibility.
Add new attributes to set up family and IPv6 address of GTP tunnels:
GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6. If no GTPA_FAMILY is
specified, AF_INET is assumed for backward compatibility.
setsockopt IPV6_ADDRFORM allows to downgrade socket from IPv6 to IPv4
after socket is bound. Assumption is that socket listener that is
attached to the gtp device needs to be either IPv4 or IPv6. Therefore,
GTP socket listener does not allow for IPv4-mapped-IPv6 listener.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently GTP packets are dropped if the next extension field is set to
non-zero value, but this are valid GTP packets.
TS 29.281 provides a longer header format, which is defined as struct
gtp1_header_long. Such long header format is used if any of the S, PN, E
flags is set.
This long header is 4 bytes longer than struct gtp1_header, plus
variable length (optional) extension headers. The next extension header
field is zero is no extension header is provided.
The extension header is composed of a length field which includes total
number of 4 byte words including the extension header itself (1 byte),
payload (variable length) and next type (1 byte). The extension header
size and its payload is aligned to 4 bytes.
A GTP packet might come with a chain extensions headers, which makes it
slightly cumbersome to parse because the extension next header field
comes at the end of the extension header, and there is a need to check
if this field becomes zero to stop the extension header parser.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Update b20dc3c684 ("gtp: Allow to create GTP device without FDs") to
remove useless initialization to NULL, sockets are initialized to
non-NULL just a few lines of code after this.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Refactor struct ice_vsi_cfg_params to be embedded into struct ice_vsi.
Prior to that the members of the struct were scattered around ice_vsi,
and were copy-pasted for purposes of reinit.
Now we have struct handy, and it is easier to have something sticky
in the flags field.
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vaishnavi Tipireddy <vaishnavi.tipireddy@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_tc_setup_redirect_action() and ice_tc_setup_mirror_action() are almost
identical, except for setting filter action. Reduce them to one function
with an extra param, which handles both cases.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Update existing E830 device ids and comments to align with new naming 'C'
for 100G and 'CC' for 200G.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support for additional E830 device ids which are supported by the
driver:
- 0x12D5: Intel(R) Ethernet Controller E830-C for backplane
- 0x12D8: Intel(R) Ethernet Controller E830-C for QSFP
- 0x12DA: Intel(R) Ethernet Controller E830-C for SFP
- 0x12DC: Intel(R) Ethernet Controller E830-XXV for backplane
- 0x12DD: Intel(R) Ethernet Controller E830-XXV for QSFP
- 0x12DE: Intel(R) Ethernet Controller E830-XXV for SFP
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In prph_mac_iter, ensure that all required addresses are dumped
even if a read fails. Currently, if a read fails, the region dump
is stopped, preventing the creation of prph_mac.lst.
By dumping all addresses even if a read fails, we can accurately
determine which addresses were successfully read and which were not.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Eilon Rinat <eilon.rinat@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.31fa9ce91a1c.Ia0c86f70c7a6874c15ffc6f8235aa88530208546@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During restart mac80211 notifies the driver about the association,
(if we was associated before the restart) which causes the driver to
request statistics from the FW. This causes to an immediate exit from
EMLSR after the restart is done, when the statistics notif is handled.
(too low TPT). There is no point in requesting statistics wnyway, since
the FW just started and don't have any.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240506095953.16638dec9f7b.I093514312179bae566ad8d73ffb0355c6eee288a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware has different names for this, which is confusing
as even the convention of having the firmware name in a comment
after the struct definition wasn't met here. Fix the naming,
but keep UATS in some of it since that's the BIOS name.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.b0dfe17d5f44.I8f5f5a831c7b934ce3140f838315827c018103bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Firmware 0x2F7 assert observed in Dell platforms when using GL HW.
This issue is mitigated by setting SCU_FORCE_ACTIVE during platform
low power states.
Driver shall indicate firmware to force SCU active by setting bit 29
in context info prph scratch control flags.
This mitigation is limited to Dell platforms with GL HW only.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ofer Kimelman <ofer.kimelman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.3d0c56c2bb1a.I97d9da402890d2085b5698666cceffc417b6b6df@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While doing a passive scan, the firmware will report per-channel survey
information. This information is primarily useful for hostapd when doing
an ACS (Automatic Channel Selection). Collect this information and add
it to the result set when getting the survey information.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.9287591a5999.I54a3f9f6480d3694e67eea1cb4f5853beace2780@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When requested, the firmware can return per-channel survey information
generally used for ACS (automatic channel selection). Add the API for
this, which consists of a flag and a new channel survey notification.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.1facde532676.I3864ac4bc0fecb7fd5136e85c07585ab7100234b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The move of the scan complete notification handling to the wiphy worker
introduced a race between scan complete notification and scan abort:
- The wiphy lock is held, e.g., for rfkill handling etc.
- Scan complete notification is received but not handled yet.
- Scan abort is triggered, and scan abort is sent to the FW. Once the
scan abort command is sent successfully, the flow synchronously waits
for the scan complete notification. However, as the scan complete
notification was already received but not processed yet, this hangs for
a second and continues leaving the scan status in an inconsistent
state.
- Once scan complete handling is started (when the wiphy lock is not held)
since the scan status is not an inconsistent state, a warning is issued
and the scan complete notification is not handled.
To fix this issue, switch back the scan complete notification to be
asynchronously handling, and only move the link selection logic to
a worker (which was the original reason for the move to use wiphy lock).
While at it, refactor some prints to improve debug data.
Fixes: 07bf5297d3 ("wifi: iwlwifi: mvm: Implement new link selection algorithm")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.1f484a86324b.I63ed445a47f144546948c74ae6df85587fdb4ce3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a reading for all active EMLSR blocking reasons for testing
purposes.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.6d494a335e81.Ic0fa6a9636e3c1a3b1420e85e704a19d4a56e8d9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In iwl_mvm_rs_fw_rate_init() we have a variable cmd_id that
holds the command ID, so we can just use that instead of the
various calculations of it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506095953.f894ede03b26.I18f03c272b1c0807767f2713f3ffbb2941c57d9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After restart, we might want to end up with the same config
as before, even for multi-link/EMLSR. Therefore, don't reset
the stored link selection result in that case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.e81db303f1dc.Ie8267082f623d14376a2052d222e18da6545f34b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When there's an active link in a non-station vif, the station vif is
not allowed to enter EMLSR
Note that blocking EMLSR by calling iwl_mvm_block_esr() we will schedule
an exit from EMLSR worker, but the worker cannot run before the
activation of the non-BSS link, as ieee80211_remain_on_channel already
holds the wiphy mutex.
Handle that by explicitly calling ieee80211_set_active_links()
to leave EMLSR, and then doing iwl_mvm_block_esr() only for
consistency and to avoid re-entering it before ready.
Note that a call to ieee80211_set_active_links requires to release the
mvm mutex, but that's ok since we still hold the wiphy lock. The only
thing that might race here is the ESR_MODE_NOTIF, so this changes its
handler to run under the wiphy lock.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.916193759f8a.Idf3a3caf5cdc3e69c81710b7ceb57e87f2de87e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If CSA is happening, then exit EMLSR to keep the better link,
which is the primary link unless that's doing the CSA with
quiet. This is done because we can't transmit the OMN frame
on a quiet link, but want to exit EMLSR during CSA for better
beacon reception, so we can follow the switch accurately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.3ffff9577f08.I2620971fa5aef789e0d4a588def4c2621e8bed5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The new link selection algorithm uses defaults values for BSS load if
the BSS Load element was not published by the AP.
For 6 GHz, that value is 0. So if the best link is 6 GHz, the EMLSR
grade to always be equal to the grade of the best link,
and then the best link grade is getting a bonus of 10 percent, meaning
that we will never activate EMLSR.
Change the logic to not give a bonus for the best link.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.4614e6891dbd.Ie40eae0dd99d82ba60dea5b6dbcd42dcdf16b90d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
