When non default TTLM is applied, mac80211 may force us to use a specific
link (For example, if the only active link becomes a dormant link,
mac80211 will pick the first usable link and set it as active).
When default TTLM is applied, we have new usable links that we might want
to select. Therefore, trigger MLO scan and link selection upon change in
TTLM.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240505091420.ed2b386566a8.I0168e61da86b2027633743aaf5d97e483991f0dc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adjust EMLSR activation to account for traffic levels. By
tracking the number of RX/TX MPDUs, EMLSR will be activated only when
traffic volume meets the required threshold.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.9480f99ac8fc.If9eb946e929a39e10fe5f4638bc8bc3f8976edf1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an event occurs to unblock EMLSR, the code attempts to re-enable
EMLSR. However, the current implementation always tries to activate
EMLSR, regardless of whether the blocker was set before the unblocking
event or not. If EMLSR was already unblocked, there is no need to
re-activate it.
Fixes: 6cf7df9f01 ("wifi: iwlwifi: mvm: Add helper functions to update EMLSR status")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.eb861402dac9.I6a1d9f774f5551cfab60ea37b71a62640496af9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
EMLSR can't be activated from mac80211. Except for the debugfs, which is
intended for testing purposes. Currently we don't allow entering EMLSR
from debugfs if EMLSR is blocked, i.e. if mvmvif::esr_disable_reason is
not 0. But we need a way to activate EMLSR regardless of the vif being
blocked, for testing. Remove the check of esr_disable_reason
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.bc3c24d9e0e6.Iad60e22a0d7e2b2b989051e1140b6dc98bef7bcc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the reason for exiting EMLSR was a blocking reason, wait for the
corresponding unblocking event:
- if there is an ongoing scan - do nothing. Link selection will be
triggered at the end of it.
- If more than 30 seconds passed since the exit, trigger MLO scan, which
will trigger link selection
- If less then 30 seconds passed since exit, reuse the latest link
selection result
If the reason for exiting EMLSR was an exit reason (IWL_MVM_EXIT_*),
schedule MLO scan in 30 seconds.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240505091420.6a808c4ae8f5.Ia79605838eb6deee9358bec633ef537f2653db92@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
BT Coex disables EMLSR only for a 2.4 GHz link, but doesn't block the
vif from using EMLSR with a different link pair. In addition, storing it
in mvmvif:disable_esr_reason requires extracting the BT Coex bit before
checking if EMLSR is blocked or not for a specific vif.
Therefore, change the BT Coex bit to be an exit reason and not a
blocker. On link selection, EMLSR mode will be re-calculated for the 2.4
GHz link instead of checking that bit.
While at it, move the relevant function declarations to the EMLSR
functions area in mvm.h
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240505091420.a2e93b67c895.I183a0039ef076613144648cc46fbe9ab3d47c574@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Given how late we are in the cycle, merge the two fixes from
wireless into wireless-next as they don't see that urgent.
This way, the wireless tree won't need rebasing later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The PTP_CMD_CTL is a self clearing register which controls the PTP clock
values. In the current implementation driver waits for a duration of 20
sec in case of HW failure to clear the PTP_CMD_CTL register bit. This
timeout of 20 sec is very long to recognize a HW failure, as it is
typically cleared in one clock(<16ns). Hence reducing the timeout to 1 sec
would be sufficient to conclude if there is any HW failure observed. The
usleep_range will sleep somewhere between 1 msec to 20 msec for each
iteration. By setting the PTP_CMD_CTL_TIMEOUT_CNT to 50 the max timeout
is extended to 1 sec.
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240502050300.38689-1-rengarajan.s@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Major changes are listed as below
rtl8xxxu:
- remove rtl8xxxu_ prefix from filename
- cleanup includes of header files
rtlwifi:
- adjust code to share with coming support of rtl8192du
rtw89:
- complete features of new WiFi 7 chip 8922AE including BT-coexistence
and WoWLAN
- use BIOS ACPI settings to set TX power and channels
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuyEnvMdOsBl1WjpdjlvZYmhshd8FAmY2Jk8ACgkQjlvZYmhs
hd/I9Q//aatzdSDkVtVC9YUFLAb+UYXc0s8t7Kq4eYEu/ZgFRgWHcB1Ka8OBE/9p
mkCiLPBujzqI5nLq+9HoJ0ptzI9F93QnPrsLr670NpY5Nt7IRO5ph90/HN/e2VPm
+FlF+EZ5UuHolw+KaA3Kym3a6Ui7vnmIZympRkk9vKrq4GAXmcVI4zVNAFgRfHo1
tWBdGONlMJGjjIQ2UJ8CiTRMkM7Ph3VgK/aCJyHwtAJvVxSJFN9b1cDzW64DES5V
cPQgVtRg3o/l05KJ+xrggXQWSkiYrtbBMX6URTkOaX6cfVDd6D8qsLLB/CabXGjo
12LqxAxMQuQ44kxXyFSln5SgNwMA0X301Qbzms5KCfKDd9SMZ0MKmOrAlEI35Og5
T03DUg2btD6VSFZJcnNCmBZtSdlm7fhRlxmJTo/N++6lS8CmA0NettkwcOPpfi1l
KdaU735KUG3lgelW9gj4RWUI06cVZ2y4UPAh3fvMq7FuwGDyJvFftrgwn/bN2jPH
9Zmivq1Q2/7xwZ/hhzAwLNUAUv6191XZXAwMxBGT/qpNNrgwMiLnVEjMa1/pgixH
Z5cMlg5c14wpaepB70PCvy2CImOBcGAs8kfvX8cER5L29+lmg5vpdz+DGTCKK8t3
2tdMTA9xtDc+J1EIqgydSXvMfDwdyX9wBr+3sqOVdzfFqeSEx9I=
=z69x
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2024-05-04-v2' of https://github.com/pkshih/rtw
rtw-next patches for v6.10
Major changes are listed as below
rtl8xxxu:
- remove rtl8xxxu_ prefix from filename
- cleanup includes of header files
rtlwifi:
- adjust code to share with coming support of rtl8192du
rtw89:
- complete features of new WiFi 7 chip 8922AE including BT-coexistence
and WoWLAN
- use BIOS ACPI settings to set TX power and channels
Every tx and rx ring has its own queue-page-list (QPL) that serves as
the bounce buffer. Previously we were allocating QPLs for all queues
before the queues themselves were allocated and later associating a QPL
with a queue. This is avoidable complexity: it is much more natural for
each queue to allocate and free its own QPL.
Moreover, the advent of new queue-manipulating ndo hooks make it hard to
keep things as is: we would need to transfer a QPL from an old queue to
a new queue, and that is unpleasant.
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We now account for the fact that the NIC might send us stats for a
subset of queues. Without this change, gve_get_ethtool_stats might make
an invalid access on the priv->stats_report->stats array.
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This does not fix any existing bug. In anticipation of the ndo queue api
hooks that alloc/free/start/stop a single Rx queue, the already existing
per-queue stop functions are being made more robust. Specifically for
this use case: rx_queue_n.stop() + rx_queue_n.start()
Note that this is not the use case being used in devmem tcp (the first
place these new ndo hooks would be used). There the usecase is:
new_queue.alloc() + old_queue.stop() + new_queue.start() + old_queue.free()
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to make possible the implementation of per-queue ndo hooks,
gve_turnup was changed in a previous patch to account for queues already
having some unprocessed descriptors: it does a one-off napi_schdule to
handle them. If conditions of consistent high traffic persist in the
immediate aftermath of this, the poll routine for a queue can be "stuck"
on the cpu on which the ndo hooks ran, instead of the cpu its irq has
affinity with.
This situation is exacerbated by the fact that the ndo hooks for all the
queues are invoked on the same cpu, potentially causing all the napi
poll routines to be residing on the same cpu.
A self correcting mechanism in the poll method itself solves this
problem.
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gVNIC has a requirement that all queues have to be quiesced before any
queue is operated on (created or destroyed). To enable the
implementation of future ndo hooks that work on a single queue, we need
to evolve gve_turnup to account for queues already having some
unprocessed descriptors in the ring.
Say rxq 4 is being stopped and started via the queue api. Due to gve's
requirement of quiescence, queues 0 through 3 are not processing their
rings while queue 4 is being toggled. Once they are made live, these
queues need to be poked to cause them to check their rings for
descriptors that were written during their brief period of quiescence.
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the queues are either all live or all dead, toggling from one
state to the other via the ndo open and stop hooks. The future addition
of single-queue ndo hooks changes this, and thus gve_turnup and
gve_turndown should evolve to account for a state where some queues are
live and some aren't.
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows for implementing future ndo hooks that act on a single
queue.
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although this is not fixing any existing double free bug, making these
functions idempotent allows for a simpler implementation of future ndo
hooks that act on a single queue.
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
le32p_replace_bits() only updates partial bits of rate_mask, and GCC warns
below. Set initial value to avoid warnings, and prevent random value of
missed bits (bit 6 of rate_mask.macid_and_short_gi).
In file included from ./include/linux/fortify-string.h:5,
from ./include/linux/string.h:369,
from ./include/linux/bitmap.h:13,
from ./include/linux/cpumask.h:13,
from ./include/linux/sched.h:16,
from drivers/net/wireless/realtek/rtlwifi/rtl8192d/../wifi.h:9,
from drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c:4:
In function 'le32p_replace_bits',
inlined from 'rtl92de_update_hal_rate_mask.isra' at drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c:986:2:
./include/linux/bitfield.h:189:15: warning: 'rate_mask' is used uninitialized [-Wuninitialized]
189 | *p = (*p & ~to(field)) | type##_encode_bits(val, field); \
| ^~
./include/linux/bitfield.h:196:9: note: in expansion of macro '____MAKE_OP'
196 | ____MAKE_OP(le##size,u##size,cpu_to_le##size,le##size##_to_cpu) \
| ^~~~~~~~~~~
./include/linux/bitfield.h:201:1: note: in expansion of macro '__MAKE_OP'
201 | __MAKE_OP(32)
| ^~~~~~~~~
drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c: In function 'rtl92de_update_hal_rate_mask.isra':
drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c:863:37: note: 'rate_mask' declared here
863 | struct rtl92d_rate_mask_h2c rate_mask;
| ^~~~~~~~~
Compile tested only.
Fixes: 014bba73b5 ("wifi: rtlwifi: Adjust rtl8192d-common for USB")
Cc: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240504111916.31445-1-pkshih@realtek.com
Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
So, remove unused structs and fix the following
-Wflex-array-member-not-at-end warnings:
drivers/net/wireless/realtek/rtlwifi/btcoexist/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192c/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192ce/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192de/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192se/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8723be/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8723com/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/ZjLFIa31BGPVCGh1@neat
Add H2C command and offload template packet to allow firmware send ARP
response in WoWLAN mode. Then, firmware in WoWLAN mode can interactive
with peer that issue ARP request to query MAC address.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-13-pkshih@realtek.com
When using the WEP cipher, we need to add the address cam type as all
unicast mode to let firmware to work. Although WEP only set GTK in
mac80211, but we need to set both PTK and GTK information to firmware.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-12-pkshih@realtek.com
Once we connect to AP with 802.11w enabled, IGTK rekey happen during GTK
happen. We get IGTK IPN from mac80211 and set to firmware, and get latest
IGTK IPN from AOAC report then update to mac80211 after resume. When rekey
happen, also update new IGTK key info to mac80211. Furthermore, We
construct SA query reply packet to firmware. If firmware received SA query
request from AP can transmit reply back when suspend.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-11-pkshih@realtek.com
When resume we parse AOAC report from firmware using H2C and C2H
registers before enable interrupt, then update PTK RX PN and GTK RX PN.
After enable interrupt, we parse AOAC report using H2C and C2H commands,
then update PTK TX PN and update new GTK key info if GTK rekey during
suspend. Furthermore, We update pattern match index if wakeup by pattern.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-10-pkshih@realtek.com
We construct EAPoL packet with various encryption method, and download
to firmware. Also we add Key Encryption Key (KEK) and Key Confirmation Key
(KCK) to H2C command. Once firmware received EAPoL group rekey packet(1/2)
can TX EAPoL group rekey packet(2/2) when suspend.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-8-pkshih@realtek.com
This H2C command is used to set WoWLAN global config, and we correct
the H2C format by enlarging the H2C size to fill GTK and PTK info.
This fix is compatible with old firmware.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-7-pkshih@realtek.com
This H2C command set key information into security CAM including key
index, entry index and valid map. No logic is changed.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-6-pkshih@realtek.com
Get the PTK and PTK TRX PN value and transfer to IV value, these
values will used by firmware to generate packets with correct IV value.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-5-pkshih@realtek.com
Need Auth Key Management(AKM) to let firmware to generate appropriate
EAPoL packet for GTK rekey. The AKM is present in the association request
RSN IE to indicate which cipher that station selected.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-4-pkshih@realtek.com
After enabling packet offload, the TX will be stuck after resume from
WoWLAN mode. And the 8852c gets error messages like
rtw89_8852ce 0000:04:00.0: No busy txwd pages available
rtw89_8852ce 0000:04:00.0: queue 0 txwd 100 is not idle
rtw89_8852ce 0000:04:00.0: queue 0 txwd 101 is not idle
rtw89_8852ce 0000:04:00.0: queue 0 txwd 102 is not idle
rtw89_8852ce 0000:04:00.0: queue 0 txwd 103 is not idle
If suspend/resume many times that firmware will download failed and
disconnection.
To fix these issues, We removed the rtw89_hci_disable_intr() and
rtw89_hci_enable_intr() during rtw89_wow_swap_fw() to prevent add packet
offload can't receive c2h back due to interrupt disable. Only 8852C and
8922A needs to disable interrupt before downloading fw.
Furthermore, we avoid using low power HCI mode on WoWLAN mode, to prevent
interrupt enabled, then get interrupt and calculate RXBD mismatched due to
software RXBD index already reset but hardware RXBD index not yet.
Fixes: 5c12bb66b7 ("wifi: rtw89: refine packet offload flow")
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-3-pkshih@realtek.com
802.11be WiFi chips need a RFK (RF calibration) notify H2C command after
downloading WoWLAN firmware to make sure RF TX/RX work fine when leaving
power save mode, so add it to correct RF TX/RX in WoWLAN mode.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-2-pkshih@realtek.com
This reverts commit a580ea994f.
This revert is to resolve Dragos's report of page_pool leak here:
https://lore.kernel.org/lkml/20240424165646.1625690-2-dtatulea@nvidia.com/
The reverted patch interacts very badly with commit 2cc3aeb5ec ("skbuff:
Fix a potential race while recycling page_pool packets"). The reverted
commit hopes that the pp_recycle + is_pp_page variables do not change
between the skb_frag_ref and skb_frag_unref operation. If such a change
occurs, the skb_frag_ref/unref will not operate on the same reference type.
In the case of Dragos's report, the grabbed ref was a pp ref, but the unref
was a page ref, because the pp_recycle setting on the skb was changed.
Attempting to fix this issue on the fly is risky. Lets revert and I hope
to reland this with better understanding and testing to ensure we don't
regress some edge case while streamlining skb reffing.
Fixes: a580ea994f ("net: mirror skb frag ref/unref helpers")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://lore.kernel.org/r/20240502175423.2456544-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current net-next/main does not boot for older chipsets e.g. Stratus.
Sample dmesg:
[ 11.368315] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Able to reserve only 0 out of 9 requested RX rings
[ 11.390181] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Unable to reserve tx rings
[ 11.438780] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): 2nd rings reservation failed.
[ 11.487559] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Not enough rings available.
[ 11.506012] bnxt_en 0000:02:00.0: probe with driver bnxt_en failed with error -12
This is caused by bnxt_get_avail_msix() returning a negative value for
these chipsets not using the new resource manager i.e. !BNXT_NEW_RM.
This in turn causes hwr.cp in __bnxt_reserve_rings() to be set to 0.
In the current call stack, __bnxt_reserve_rings() is called from
bnxt_set_dflt_rings() before bnxt_init_int_mode(). Therefore,
bp->total_irqs is always 0 and for !BNXT_NEW_RM bnxt_get_avail_msix()
always returns a negative number.
Historically, MSIX vectors were requested by the RoCE driver during
run-time and bnxt_get_avail_msix() was used for this purpose. Today,
RoCE MSIX vectors are statically allocated. bnxt_get_avail_msix() should
only be called for the BNXT_NEW_RM() case to reserve the MSIX ahead of
time for RoCE use.
bnxt_get_avail_msix() is also be simplified to handle the BNXT_NEW_RM()
case only.
Fixes: d630624ebd ("bnxt_en: Utilize ulp client resources if RoCE is not registered")
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240502203757.3761827-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the driver uses local_bh_disable()/local_bh_enable() in its
IRQ handler to avoid triggering net_rx_action() softirq on exit from
netif_rx(). The net_rx_action() could trigger this driver .start_xmit
callback, which is protected by the same lock as the IRQ handler, so
calling the .start_xmit from netif_rx() from the IRQ handler critical
section protected by the lock could lead to an attempt to claim the
already claimed lock, and a hang.
The local_bh_disable()/local_bh_enable() approach works only in case
the IRQ handler is protected by a spinlock, but does not work if the
IRQ handler is protected by mutex, i.e. this works for KS8851 with
Parallel bus interface, but not for KS8851 with SPI bus interface.
Remove the BH manipulation and instead of calling netif_rx() inside
the IRQ handler code protected by the lock, queue all the received
SKBs in the IRQ handler into a queue first, and once the IRQ handler
exits the critical section protected by the lock, dequeue all the
queued SKBs and push them all into netif_rx(). At this point, it is
safe to trigger the net_rx_action() softirq, since the netif_rx()
call is outside of the lock that protects the IRQ handler.
Fixes: be0384bf59 ("net: ks8851: Handle softirqs at the end of IRQ thread to fix hang")
Tested-by: Ronald Wahl <ronald.wahl@raritan.com> # KS8851 SPI
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240502183436.117117-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
-----BEGIN PGP SIGNATURE-----
iQFLBAABCgA1FiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYztxUXHHF1aWNfa3Zh
bG9AcXVpY2luYy5jb20ACgkQbhckVSbrbZs0NQf/dYF+Pjy3eh9vabwZ05rUZwLF
P/k7Q8o631Gl0LTkmGw6SseUFswAOH1uwaKpWQvjhzHE8Fy4ziMeQ+aruqtbfZ3i
Q1BYsnCbQHZ+1HX0EJmB9KDz8+/G1JxOlwiux7EsujOuFixjomm08VEJ4QXGVSnj
NnCg0zx/0njDqT/3KjJuoL4stAk0HDvIayiVGsQOwcQQJelLGudqTNmRPnKQkR5w
yRUX+NaFlVHgbbhsnEyW3XeqKVFwgy64BtNRIVpJ0lF51aazT80DagNmw5CawznC
uak1nFktAtX/AID3lWRjek3smIdlnUz39JojKW7iO60/wfZXXFbR8Xl2XEpp9g==
=fF10
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20240502' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
ath.git patches for v6.10
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
Advertise support for BSS color and then once the countdown reaches 0,
call color change finish.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240422053412.2024075-8-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
struct net_device shouldn't be embedded into any structure, instead,
the owner should use the priv space to embed their state into net_device.
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_device from struct iwl_trans_pcie by converting it
into a pointer. Then use the leverage alloc_netdev() to allocate the
net_device object at iwl_trans_pcie_alloc.
The private data of net_device becomes a pointer for the struct
iwl_trans_pcie, so, it is easy to get back to the iwl_trans_pcie parent
given the net_device object.
[1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://msgid.link/20240501165417.3406039-1-leitao@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This appears to work around a deadlock regression that came in
with the LED merge in 6.9.
The deadlock happens on my system with 24 iwlwifi radios, so maybe
it something like all worker threads are busy and some work that needs
to complete cannot complete.
Link: https://lore.kernel.org/linux-kernel/20240411070718.GD6194@google.com/
Fixes: f5c31bcf60 ("Merge tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://msgid.link/20240430234212.2132958-1-greearb@candelatech.com
[also remove unnecessary "load_module" var and now-wrong comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since commit a3c53be55c ("net: dsa: mv88e6xxx: Support multiple MDIO
busses") mv88e6xxx_default_mdio_bus() has checked that the
return value of list_first_entry() is non-NULL.
This appears to be intended to guard against the list chip->mdios being
empty. However, it is not the correct check as the implementation of
list_first_entry is not designed to return NULL for empty lists.
Instead, use list_first_entry_or_null() which does return NULL if the
list is empty.
Flagged by Smatch.
Compile tested only.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430-mv88e6xx-list_empty-v3-1-c35c69d88d2e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use flow_rule_is_supp_control_flags() to reject filters
with unsupported control flags.
In case any unsupported control flags are masked,
flow_rule_is_supp_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
Remove FLOW_DIS_FIRST_FRAG specific error message,
and treat it as any other unsupported control flag.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240422152728.175677-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a ("bpf: verifier: prevent userspace memory access")
d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No driver logic changes are required to support the VFs, so just add
the VF PCI ID.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the error recovery path (AER, firmware recovery, etc), the
driver notifies the RoCE driver via ULP_STOP before the reset
and via ULP_START after the reset, all under RTNL_LOCK. The
RoCE driver can take a long time if there are a lot of QPs to
destroy, so it is not ideal to hold the global RTNL lock.
Rely on the new en_dev_lock mutex instead for ULP_STOP and
ULP_START. For the most part, we move the ULP_STOP call before
we take the RTNL lock and move the ULP_START after RTNL unlock.
Note that SRIOV re-enablement must be done after ULP_START
or RoCE on the VFs will not resume properly after reset.
The one scenario in bnxt_hwrm_if_change() where the RTNL lock
is already taken in the .ndo_open() context requires the ULP
restart to be deferred to the bnxt_sp_task() workqueue.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current scheme relies heavily on the RTNL lock for all ULP
operations between the L2 and the RoCE driver. Add a new en_dev_lock
mutex so that the asynchronous ULP_STOP and ULP_START operations
can be serialized with bnxt_register_dev() and bnxt_unregister_dev()
calls without relying on the RTNL lock. The next patch will remove
the RTNL lock from the ULP_STOP and ULP_START calls.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to call ULP_STOP and ULP_START before and after the
L2 reset in bnxt_reset_task(). This L2 reset is done after detecting
TX timeout, RX ring errors, or VF config changes. The L2 reset does
not affect RoCE since the firmware is not reset and the backing store
is left alone.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
