When we tried to compile DCN32/321 for 32-bit architecture, we got this
error message:
ERROR: modpost: "__nedf2" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This commit fixes this issue by rewriting a small part of the
dcn32_build_wm_range_table.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b998 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes when trying to enable some feature, we have to define some
values with educated guesses, but we mark those values as TBD, which
means "To Be Determined". However, the correct way to approach it is by
loading that information from the firmware. Anyway, some of the values
that we were experimenting with caused this issue:
ERROR: modpost: "__muldf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This commit fixes this issue by removing the division by two since it is
harmless in this case.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b998 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we tried to compile DCN32/321 for 32-bit architecture, we got this
error message:
ERROR: modpost: "__floatunsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This was caused because we were trying to assign an unsigned int to a
double value which causes issues for 32-bit architecture. This issue can
be fixed by changing the value type.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b998 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While we tried to build amdgpu on i386, we got this error:
ERROR: modpost: "__umoddi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This commit fixes this issue by replacing the standard module operator
with div_u64_rem.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: d3dfceb58d ("drm/amd/display: Add dependant changes for DCN32/321")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Redundant if-else cases for repeater and non-repeater checks
[How]
Without changing the core logic, rearranged the code by removing
redundant checks
Signed-off-by: Chandan Vurdigere Nataraj <chandan.vurdigerenataraj@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sparse reports
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn32/irq_service_dcn32.c:39:20: warning: symbol 'to_dal_irq_source_dcn32' was not declared. Should it be static?
to_dal_irq_source_dnc32() is only referenced in irq_service_dnc32.c, so change its
storage class specifier to static.
Fixes: 0efd4374f6 ("drm/amd/display: add dcn32 IRQ changes")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sparse reports
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3885:6: warning: symbol 'FORCE_RATE' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3886:10: warning: symbol 'FORCE_LANE_COUNT' was not declared. Should it be static?
Neither of thse variables is used in dc_link_dp.c. Reviewing the commit listed in
the fixes tag shows neither was used in the original patch. So remove them.
Fixes: 265280b998 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used so drop it.
Fixes: ec457f8378 ("drm/amd/display: Drop unnecessary detect link code")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kernel test robot throws below warning ->
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:
In function 'dc_link_reduce_mst_payload':
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:3782:32:
warning: variable 'ret' set but not used [-Wunused-but-set-variable]
3782 | enum act_return_status ret;
Removed the unused ret variable.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move more stack variable in to dummy vars structure on the heap.
Fixes stack frame size errors:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3833:1: error: the frame size of 2720 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
3833 | } // ModeSupportAndSystemConfigurationFull
| ^
Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira Jordao <Rodrigo.Siqueira@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dml_print message. Fix it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c:549:4: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation]
pll_req = dc_fixpt_from_int(pll_req_reg & clk_mgr->clk_mgr_mask->FbMult_int);
^
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c:542:3: note: previous statement is here
else
^
1 warning generated.
Indent this statement to the left, as it was clearly intended to be
called unconditionally, which will fix the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1655
Fixes: 3e838f7ccf ("drm/amd/display: Get VCO frequency from registers")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
GCC 12 catches the following incorrect comparison in the if arm
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c: In function ‘dml32_ModeSupportAndSystemConfigurationFull’:
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:3740:33: error: the comparison will always evaluate as ‘true’ for the address of ‘USRRetrainingSupport’ will never be NULL [-Werror=address]
3740 | || &mode_lib->vba.USRRetrainingSupport[i][j])) {
| ^~
In file included from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_lib.h:32,
from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dc.h:45,
from drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:30:
./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_vba.h:1175:14: note: ‘USRRetrainingSupport’ declared here
1175 | bool USRRetrainingSupport[DC__VOLTAGE_STATES][2];
|
Fix this by remove preceding & so that value is compared instead of
address
Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
When the a 3d array is used by indexing with only one dimension in an if
condition, the addresses get compared instead of the intended value stored in the
array. GCC 12.1 caught this error:
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c: In function ‘DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation’:
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:1007:45: error: the comparison will always evaluate as ‘true’ for the address of ‘use_one_row_for_frame_flip’ will never be NULL [-Werror=address]
1007 | if (v->use_one_row_for_frame_flip[k]) {
| ^
In file included from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_lib.h:32,
from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dc.h:45,
from drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:30:
./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_vba.h:605:14: note: ‘use_one_row_for_frame_flip’ declared here
605 | bool use_one_row_for_frame_flip[DC__VOLTAGE_STATES][2][DC__NUM_DPP__MAX];
|
Fix this by explicitly specifying the last two indices.
Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DCN20 and above, the code that actually hooks up the provided
input_color_space got lost at some point.
Fixes COLOR_ENCODING and COLOR_RANGE doing nothing on DCN20+.
Tested using Steam Remote Play Together + gamescope.
Update other DCNs the same wasy DCN1.x was updates in
commit a1e07ba89d ("drm/amd/display: Use plane->color_space for dpp if specified")
Fixes: a1e07ba89d ("drm/amd/display: Use plane->color_space for dpp if specified")
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC patchset brings improvements in multiple areas. In summary, we
highlight:
- Remove unnecessary code;
- Small fixes (compilation warnings, typos, etc);
- Improvements in the DPMS code;
- Fix eDP issues
- Improvements in the MST code
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We already have DALSMC_MSG_TransferTableDram2Smu in the file dalsmc.h;
for this reason, we don't need this definition in the smu msg file.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In DCN32 clk hook functions, we are using the wrong reference for
get_dp_ref_clk_frequency and missing the get_dtb_ref_clk_frequency
reference. This commit adds those references.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For DCN32 we do not have a pme workaround function defined that sends a
BacoAudio message. Default code had uses the DCN30 function for pme
workaround. PMFW headers are inconsistent with their message ID
definitions which cause ID's to clash leading to inconsistent system
behaviour. There is a clash with FCLK message due to inconsitent PMFW
headers.
[How]
Implement a new BacoAudio function to workaround the problem of
inconsistent PMFW headers in order to avoid BacoAudio message clasing
with FCLK Enable message.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to get VCO frequency from registers.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
FCLK not supported for DCN321, but still need to update the software
state accordingly to prevent unneeded full updates in driver
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain use cases will pass in zero in the new_clocks parameter for all
clocks. This results in a divide-by-zero error when attempting to round
up the new clock.
When new_clocks are zero, no rounding is required, so we can skip it.
[How]
Guard the division calculation with a check to make sure clocks are not
zero.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When lowering DPPCLK, we want to program the DPP DTO before updating
the DPP refclk.
- Also update DPPCLK to the exact frequency that will be set after clock
divider has been programmed. This will prevent rounding errors when
making the request to PMFW (we need DPP DTO to match exactly with the
exact DPP refclk).
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Our debug struct has the min_disp_clk_khz and min_dpp_clk_khz options,
which we ignore in the DCN32. This commit introduces those checks and
the necessary calculation.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Check if aux is not accessible before updating payload allocation table.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Extract update stream allocation table into link hwss as part of the
link hwss refactor work.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Old vendor specific w/a are no longer needed and unused. Clean up
codebase by removing them.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Several issues were discovered that caused link
training to fail when an LTTPR device is
connected downstream for the fixed VS sequence.
[How]
The following were added:
- workaround to configure AUX timeout
for fixed VS sequence
- additional delay before disabling
fixed VS intercept
- detection of fixed VS deadlock state and
performing DPCD sequence to recover
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The function currently skips overriding the drive
settings of the first lane.
[How]
Change for loop to start at 0 instead of 1.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Change struct initializer from multiple brace to single brace.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
This is one of the major steps to decouple hw lane settings
from dpcd lane settings.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Check always_match_dpcd_with_hw_lane_settings bit before
overriding the DP drive settings
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enrich the log to provide more informatio in MST payload update.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Use dc_is_hdmi_signal to determine signal type.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Logging for SMU response value after the wait allows us to know
immediately what the response value was. Makes it easier to debug should
the value be anything other than OK.
[HOW]
Using the the already available DC SMU logging functions.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
For VG, we want to turn off power/backlight of the intenral panel when
plugging in external monitor and going to "external monitor only" mode.
[how]
For turning off power of the internal panel, ignore the config flag whic
bypasses power sequencing for eDP panels.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Only on VG, if external display is disconnected during S3 suspend, the
internal panel doesn't light up on resume because we set the power state
using an unsupported DPCD register SET_POWER. To check the register is
supported, we need to check SET_POWER_CAPABLE first which is
eDP-specific DPCD register field.
[how]
Check the SET_POWER_CAPABLE register field and decide the control of the
eDP power state based on the read register value.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete unnecessary codes in detect_link_and_local_sink. We already have
correct stop logic in dc_link_detect.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3c4d55c9b9.
Revert the commit because:
- It's incomplete of the function dm_set_dpms_off() for mst case. For
stream sinks whithin the same mst topology, they share the same dc_link.
dm_set_dpms_off() tries to update one mst stream only which is
incomplete.
- Setting dpms off should be triggered by usermode. Besdies, it seems
usermode does release relevant resource for mst & non-mst case when
unplug connecotr now.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A variety of Lenovo machines with Rembrandt APUs and OLED panels have
stopped showing the display at login. This behavior clears up after
leaving it idle and moving the mouse or touching keyboard.
It was bisected to be caused by commit 559e265522 ("drm/amd/display:
keep eDP Vdd on when eDP stream is already enabled"). Revert this commit
to fix the issue.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2047
Reported-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 559e265522 ("drm/amd/display: keep eDP Vdd on when eDP stream is already enabled")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mark Pearson <markpearson@lenovo.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the same pattern as the DML Makefile and while we are here
add a missing x86 guard around the msse flags for DCN3.2.x.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit d8e4fb9112.
This is no longer necessary as newer patches require these functions
without CONFIG_DRM_AMD_DC_DCN.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
All displays need to be blanked during the uclk OC interface so that we can
guarantee pstate switching support. If the display config doesn't support
pstate switching, only using core_link_disable_stream will not enable it
as the front-end is untouched. We need to go through the full plane removal
sequence to properly program the pipe to allow pstate switching.
[How]
- guard clk_mgr functions with non-NULL checks
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dc_submit_i2c_oem could be called with ddc null
[how]
add null check and fail the call instead
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
need to add timing adjustment for fva.
[how]
add hook to optc and hwseq.
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
