The source device should ensure the sink is ready before proceeding to read the sink capability or perform any aux transactions. The sink will indicate its readiness by asserting the HPD line. The controller driver needs to wait for the hpd line to be asserted by the sink before it performs any aux transactions. The eDP sink is assumed to be always connected. It needs power from the source and its HPD line will be asserted only after the panel is powered on. The panel power will be enabled from the panel-edp driver and only after that, the hpd line will be asserted. Whereas for DP, the sink can be hotplugged and unplugged anytime. The hpd line gets asserted to indicate the sink is connected and ready. Hence there is no need to wait for the hpd line to be asserted for a DP sink. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/483312/ Link: https://lore.kernel.org/r/1650887072-16652-4-git-send-email-quic_sbillaka@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
549 lines
13 KiB
C
549 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <drm/drm_print.h>
|
|
|
|
#include "dp_reg.h"
|
|
#include "dp_aux.h"
|
|
|
|
enum msm_dp_aux_err {
|
|
DP_AUX_ERR_NONE,
|
|
DP_AUX_ERR_ADDR,
|
|
DP_AUX_ERR_TOUT,
|
|
DP_AUX_ERR_NACK,
|
|
DP_AUX_ERR_DEFER,
|
|
DP_AUX_ERR_NACK_DEFER,
|
|
DP_AUX_ERR_PHY,
|
|
};
|
|
|
|
struct dp_aux_private {
|
|
struct device *dev;
|
|
struct dp_catalog *catalog;
|
|
|
|
struct mutex mutex;
|
|
struct completion comp;
|
|
|
|
enum msm_dp_aux_err aux_error_num;
|
|
u32 retry_cnt;
|
|
bool cmd_busy;
|
|
bool native;
|
|
bool read;
|
|
bool no_send_addr;
|
|
bool no_send_stop;
|
|
bool initted;
|
|
bool is_edp;
|
|
u32 offset;
|
|
u32 segment;
|
|
|
|
struct drm_dp_aux dp_aux;
|
|
};
|
|
|
|
#define MAX_AUX_RETRIES 5
|
|
|
|
static ssize_t dp_aux_write(struct dp_aux_private *aux,
|
|
struct drm_dp_aux_msg *msg)
|
|
{
|
|
u8 data[4];
|
|
u32 reg;
|
|
ssize_t len;
|
|
u8 *msgdata = msg->buffer;
|
|
int const AUX_CMD_FIFO_LEN = 128;
|
|
int i = 0;
|
|
|
|
if (aux->read)
|
|
len = 0;
|
|
else
|
|
len = msg->size;
|
|
|
|
/*
|
|
* cmd fifo only has depth of 144 bytes
|
|
* limit buf length to 128 bytes here
|
|
*/
|
|
if (len > AUX_CMD_FIFO_LEN - 4) {
|
|
DRM_ERROR("buf size greater than allowed size of 128 bytes\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Pack cmd and write to HW */
|
|
data[0] = (msg->address >> 16) & 0xf; /* addr[19:16] */
|
|
if (aux->read)
|
|
data[0] |= BIT(4); /* R/W */
|
|
|
|
data[1] = msg->address >> 8; /* addr[15:8] */
|
|
data[2] = msg->address; /* addr[7:0] */
|
|
data[3] = msg->size - 1; /* len[7:0] */
|
|
|
|
for (i = 0; i < len + 4; i++) {
|
|
reg = (i < 4) ? data[i] : msgdata[i - 4];
|
|
reg <<= DP_AUX_DATA_OFFSET;
|
|
reg &= DP_AUX_DATA_MASK;
|
|
reg |= DP_AUX_DATA_WRITE;
|
|
/* index = 0, write */
|
|
if (i == 0)
|
|
reg |= DP_AUX_DATA_INDEX_WRITE;
|
|
aux->catalog->aux_data = reg;
|
|
dp_catalog_aux_write_data(aux->catalog);
|
|
}
|
|
|
|
dp_catalog_aux_clear_trans(aux->catalog, false);
|
|
dp_catalog_aux_clear_hw_interrupts(aux->catalog);
|
|
|
|
reg = 0; /* Transaction number == 1 */
|
|
if (!aux->native) { /* i2c */
|
|
reg |= DP_AUX_TRANS_CTRL_I2C;
|
|
|
|
if (aux->no_send_addr)
|
|
reg |= DP_AUX_TRANS_CTRL_NO_SEND_ADDR;
|
|
|
|
if (aux->no_send_stop)
|
|
reg |= DP_AUX_TRANS_CTRL_NO_SEND_STOP;
|
|
}
|
|
|
|
reg |= DP_AUX_TRANS_CTRL_GO;
|
|
aux->catalog->aux_data = reg;
|
|
dp_catalog_aux_write_trans(aux->catalog);
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
|
|
struct drm_dp_aux_msg *msg)
|
|
{
|
|
ssize_t ret;
|
|
unsigned long time_left;
|
|
|
|
reinit_completion(&aux->comp);
|
|
|
|
ret = dp_aux_write(aux, msg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
time_left = wait_for_completion_timeout(&aux->comp,
|
|
msecs_to_jiffies(250));
|
|
if (!time_left)
|
|
return -ETIMEDOUT;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t dp_aux_cmd_fifo_rx(struct dp_aux_private *aux,
|
|
struct drm_dp_aux_msg *msg)
|
|
{
|
|
u32 data;
|
|
u8 *dp;
|
|
u32 i, actual_i;
|
|
u32 len = msg->size;
|
|
|
|
dp_catalog_aux_clear_trans(aux->catalog, true);
|
|
|
|
data = DP_AUX_DATA_INDEX_WRITE; /* INDEX_WRITE */
|
|
data |= DP_AUX_DATA_READ; /* read */
|
|
|
|
aux->catalog->aux_data = data;
|
|
dp_catalog_aux_write_data(aux->catalog);
|
|
|
|
dp = msg->buffer;
|
|
|
|
/* discard first byte */
|
|
data = dp_catalog_aux_read_data(aux->catalog);
|
|
|
|
for (i = 0; i < len; i++) {
|
|
data = dp_catalog_aux_read_data(aux->catalog);
|
|
*dp++ = (u8)((data >> DP_AUX_DATA_OFFSET) & 0xff);
|
|
|
|
actual_i = (data >> DP_AUX_DATA_INDEX_OFFSET) & 0xFF;
|
|
if (i != actual_i)
|
|
break;
|
|
}
|
|
|
|
return i;
|
|
}
|
|
|
|
static void dp_aux_native_handler(struct dp_aux_private *aux, u32 isr)
|
|
{
|
|
if (isr & DP_INTR_AUX_I2C_DONE)
|
|
aux->aux_error_num = DP_AUX_ERR_NONE;
|
|
else if (isr & DP_INTR_WRONG_ADDR)
|
|
aux->aux_error_num = DP_AUX_ERR_ADDR;
|
|
else if (isr & DP_INTR_TIMEOUT)
|
|
aux->aux_error_num = DP_AUX_ERR_TOUT;
|
|
if (isr & DP_INTR_NACK_DEFER)
|
|
aux->aux_error_num = DP_AUX_ERR_NACK;
|
|
if (isr & DP_INTR_AUX_ERROR) {
|
|
aux->aux_error_num = DP_AUX_ERR_PHY;
|
|
dp_catalog_aux_clear_hw_interrupts(aux->catalog);
|
|
}
|
|
}
|
|
|
|
static void dp_aux_i2c_handler(struct dp_aux_private *aux, u32 isr)
|
|
{
|
|
if (isr & DP_INTR_AUX_I2C_DONE) {
|
|
if (isr & (DP_INTR_I2C_NACK | DP_INTR_I2C_DEFER))
|
|
aux->aux_error_num = DP_AUX_ERR_NACK;
|
|
else
|
|
aux->aux_error_num = DP_AUX_ERR_NONE;
|
|
} else {
|
|
if (isr & DP_INTR_WRONG_ADDR)
|
|
aux->aux_error_num = DP_AUX_ERR_ADDR;
|
|
else if (isr & DP_INTR_TIMEOUT)
|
|
aux->aux_error_num = DP_AUX_ERR_TOUT;
|
|
if (isr & DP_INTR_NACK_DEFER)
|
|
aux->aux_error_num = DP_AUX_ERR_NACK_DEFER;
|
|
if (isr & DP_INTR_I2C_NACK)
|
|
aux->aux_error_num = DP_AUX_ERR_NACK;
|
|
if (isr & DP_INTR_I2C_DEFER)
|
|
aux->aux_error_num = DP_AUX_ERR_DEFER;
|
|
if (isr & DP_INTR_AUX_ERROR) {
|
|
aux->aux_error_num = DP_AUX_ERR_PHY;
|
|
dp_catalog_aux_clear_hw_interrupts(aux->catalog);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
|
|
struct drm_dp_aux_msg *input_msg)
|
|
{
|
|
u32 edid_address = 0x50;
|
|
u32 segment_address = 0x30;
|
|
bool i2c_read = input_msg->request &
|
|
(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
|
|
u8 *data;
|
|
|
|
if (aux->native || i2c_read || ((input_msg->address != edid_address) &&
|
|
(input_msg->address != segment_address)))
|
|
return;
|
|
|
|
|
|
data = input_msg->buffer;
|
|
if (input_msg->address == segment_address)
|
|
aux->segment = *data;
|
|
else
|
|
aux->offset = *data;
|
|
}
|
|
|
|
/**
|
|
* dp_aux_transfer_helper() - helper function for EDID read transactions
|
|
*
|
|
* @aux: DP AUX private structure
|
|
* @input_msg: input message from DRM upstream APIs
|
|
* @send_seg: send the segment to sink
|
|
*
|
|
* return: void
|
|
*
|
|
* This helper function is used to fix EDID reads for non-compliant
|
|
* sinks that do not handle the i2c middle-of-transaction flag correctly.
|
|
*/
|
|
static void dp_aux_transfer_helper(struct dp_aux_private *aux,
|
|
struct drm_dp_aux_msg *input_msg,
|
|
bool send_seg)
|
|
{
|
|
struct drm_dp_aux_msg helper_msg;
|
|
u32 message_size = 0x10;
|
|
u32 segment_address = 0x30;
|
|
u32 const edid_block_length = 0x80;
|
|
bool i2c_mot = input_msg->request & DP_AUX_I2C_MOT;
|
|
bool i2c_read = input_msg->request &
|
|
(DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
|
|
|
|
if (!i2c_mot || !i2c_read || (input_msg->size == 0))
|
|
return;
|
|
|
|
/*
|
|
* Sending the segment value and EDID offset will be performed
|
|
* from the DRM upstream EDID driver for each block. Avoid
|
|
* duplicate AUX transactions related to this while reading the
|
|
* first 16 bytes of each block.
|
|
*/
|
|
if (!(aux->offset % edid_block_length) || !send_seg)
|
|
goto end;
|
|
|
|
aux->read = false;
|
|
aux->cmd_busy = true;
|
|
aux->no_send_addr = true;
|
|
aux->no_send_stop = true;
|
|
|
|
/*
|
|
* Send the segment address for every i2c read in which the
|
|
* middle-of-tranaction flag is set. This is required to support EDID
|
|
* reads of more than 2 blocks as the segment address is reset to 0
|
|
* since we are overriding the middle-of-transaction flag for read
|
|
* transactions.
|
|
*/
|
|
|
|
if (aux->segment) {
|
|
memset(&helper_msg, 0, sizeof(helper_msg));
|
|
helper_msg.address = segment_address;
|
|
helper_msg.buffer = &aux->segment;
|
|
helper_msg.size = 1;
|
|
dp_aux_cmd_fifo_tx(aux, &helper_msg);
|
|
}
|
|
|
|
/*
|
|
* Send the offset address for every i2c read in which the
|
|
* middle-of-transaction flag is set. This will ensure that the sink
|
|
* will update its read pointer and return the correct portion of the
|
|
* EDID buffer in the subsequent i2c read trasntion triggered in the
|
|
* native AUX transfer function.
|
|
*/
|
|
memset(&helper_msg, 0, sizeof(helper_msg));
|
|
helper_msg.address = input_msg->address;
|
|
helper_msg.buffer = &aux->offset;
|
|
helper_msg.size = 1;
|
|
dp_aux_cmd_fifo_tx(aux, &helper_msg);
|
|
|
|
end:
|
|
aux->offset += message_size;
|
|
if (aux->offset == 0x80 || aux->offset == 0x100)
|
|
aux->segment = 0x0; /* reset segment at end of block */
|
|
}
|
|
|
|
/*
|
|
* This function does the real job to process an AUX transaction.
|
|
* It will call aux_reset() function to reset the AUX channel,
|
|
* if the waiting is timeout.
|
|
*/
|
|
static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
|
|
struct drm_dp_aux_msg *msg)
|
|
{
|
|
ssize_t ret;
|
|
int const aux_cmd_native_max = 16;
|
|
int const aux_cmd_i2c_max = 128;
|
|
struct dp_aux_private *aux;
|
|
|
|
aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
|
|
|
|
aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
|
|
|
|
/* Ignore address only message */
|
|
if (msg->size == 0 || !msg->buffer) {
|
|
msg->reply = aux->native ?
|
|
DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
|
|
return msg->size;
|
|
}
|
|
|
|
/* msg sanity check */
|
|
if ((aux->native && msg->size > aux_cmd_native_max) ||
|
|
msg->size > aux_cmd_i2c_max) {
|
|
DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
|
|
__func__, msg->size, msg->request);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&aux->mutex);
|
|
if (!aux->initted) {
|
|
ret = -EIO;
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* For eDP it's important to give a reasonably long wait here for HPD
|
|
* to be asserted. This is because the panel driver may have _just_
|
|
* turned on the panel and then tried to do an AUX transfer. The panel
|
|
* driver has no way of knowing when the panel is ready, so it's up
|
|
* to us to wait. For DP we never get into this situation so let's
|
|
* avoid ever doing the extra long wait for DP.
|
|
*/
|
|
if (aux->is_edp) {
|
|
ret = dp_catalog_aux_wait_for_hpd_connect_state(aux->catalog);
|
|
if (ret) {
|
|
DRM_DEBUG_DP("Panel not ready for aux transactions\n");
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
dp_aux_update_offset_and_segment(aux, msg);
|
|
dp_aux_transfer_helper(aux, msg, true);
|
|
|
|
aux->read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
|
|
aux->cmd_busy = true;
|
|
|
|
if (aux->read) {
|
|
aux->no_send_addr = true;
|
|
aux->no_send_stop = false;
|
|
} else {
|
|
aux->no_send_addr = true;
|
|
aux->no_send_stop = true;
|
|
}
|
|
|
|
ret = dp_aux_cmd_fifo_tx(aux, msg);
|
|
if (ret < 0) {
|
|
if (aux->native) {
|
|
aux->retry_cnt++;
|
|
if (!(aux->retry_cnt % MAX_AUX_RETRIES))
|
|
dp_catalog_aux_update_cfg(aux->catalog);
|
|
}
|
|
/* reset aux if link is in connected state */
|
|
if (dp_catalog_link_is_connected(aux->catalog))
|
|
dp_catalog_aux_reset(aux->catalog);
|
|
} else {
|
|
aux->retry_cnt = 0;
|
|
switch (aux->aux_error_num) {
|
|
case DP_AUX_ERR_NONE:
|
|
if (aux->read)
|
|
ret = dp_aux_cmd_fifo_rx(aux, msg);
|
|
msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
|
|
break;
|
|
case DP_AUX_ERR_DEFER:
|
|
msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
|
|
break;
|
|
case DP_AUX_ERR_PHY:
|
|
case DP_AUX_ERR_ADDR:
|
|
case DP_AUX_ERR_NACK:
|
|
case DP_AUX_ERR_NACK_DEFER:
|
|
msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_NACK : DP_AUX_I2C_REPLY_NACK;
|
|
break;
|
|
case DP_AUX_ERR_TOUT:
|
|
ret = -ETIMEDOUT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
aux->cmd_busy = false;
|
|
|
|
exit:
|
|
mutex_unlock(&aux->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void dp_aux_isr(struct drm_dp_aux *dp_aux)
|
|
{
|
|
u32 isr;
|
|
struct dp_aux_private *aux;
|
|
|
|
if (!dp_aux) {
|
|
DRM_ERROR("invalid input\n");
|
|
return;
|
|
}
|
|
|
|
aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
|
|
|
|
isr = dp_catalog_aux_get_irq(aux->catalog);
|
|
|
|
if (!aux->cmd_busy)
|
|
return;
|
|
|
|
if (aux->native)
|
|
dp_aux_native_handler(aux, isr);
|
|
else
|
|
dp_aux_i2c_handler(aux, isr);
|
|
|
|
complete(&aux->comp);
|
|
}
|
|
|
|
void dp_aux_reconfig(struct drm_dp_aux *dp_aux)
|
|
{
|
|
struct dp_aux_private *aux;
|
|
|
|
aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
|
|
|
|
dp_catalog_aux_update_cfg(aux->catalog);
|
|
dp_catalog_aux_reset(aux->catalog);
|
|
}
|
|
|
|
void dp_aux_init(struct drm_dp_aux *dp_aux)
|
|
{
|
|
struct dp_aux_private *aux;
|
|
|
|
if (!dp_aux) {
|
|
DRM_ERROR("invalid input\n");
|
|
return;
|
|
}
|
|
|
|
aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
|
|
|
|
mutex_lock(&aux->mutex);
|
|
|
|
dp_catalog_aux_enable(aux->catalog, true);
|
|
aux->retry_cnt = 0;
|
|
aux->initted = true;
|
|
|
|
mutex_unlock(&aux->mutex);
|
|
}
|
|
|
|
void dp_aux_deinit(struct drm_dp_aux *dp_aux)
|
|
{
|
|
struct dp_aux_private *aux;
|
|
|
|
aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
|
|
|
|
mutex_lock(&aux->mutex);
|
|
|
|
aux->initted = false;
|
|
dp_catalog_aux_enable(aux->catalog, false);
|
|
|
|
mutex_unlock(&aux->mutex);
|
|
}
|
|
|
|
int dp_aux_register(struct drm_dp_aux *dp_aux)
|
|
{
|
|
struct dp_aux_private *aux;
|
|
int ret;
|
|
|
|
if (!dp_aux) {
|
|
DRM_ERROR("invalid input\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
|
|
|
|
aux->dp_aux.name = "dpu_dp_aux";
|
|
aux->dp_aux.dev = aux->dev;
|
|
aux->dp_aux.transfer = dp_aux_transfer;
|
|
ret = drm_dp_aux_register(&aux->dp_aux);
|
|
if (ret) {
|
|
DRM_ERROR("%s: failed to register drm aux: %d\n", __func__,
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void dp_aux_unregister(struct drm_dp_aux *dp_aux)
|
|
{
|
|
drm_dp_aux_unregister(dp_aux);
|
|
}
|
|
|
|
struct drm_dp_aux *dp_aux_get(struct device *dev, struct dp_catalog *catalog,
|
|
bool is_edp)
|
|
{
|
|
struct dp_aux_private *aux;
|
|
|
|
if (!catalog) {
|
|
DRM_ERROR("invalid input\n");
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
aux = devm_kzalloc(dev, sizeof(*aux), GFP_KERNEL);
|
|
if (!aux)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
init_completion(&aux->comp);
|
|
aux->cmd_busy = false;
|
|
aux->is_edp = is_edp;
|
|
mutex_init(&aux->mutex);
|
|
|
|
aux->dev = dev;
|
|
aux->catalog = catalog;
|
|
aux->retry_cnt = 0;
|
|
|
|
return &aux->dp_aux;
|
|
}
|
|
|
|
void dp_aux_put(struct drm_dp_aux *dp_aux)
|
|
{
|
|
struct dp_aux_private *aux;
|
|
|
|
if (!dp_aux)
|
|
return;
|
|
|
|
aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
|
|
|
|
mutex_destroy(&aux->mutex);
|
|
|
|
devm_kfree(aux->dev, aux);
|
|
}
|