Implement the per-device calls to enable or disable HW debug mode
for GFX11.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX9.4.2 now supports per-VMID debug mode controls registers
(SPI_GDBG_PER_VMID_CNTL).
Because the KFD lets the HWS handle PASID-VMID mapping, the KFD will
forward all debug mode setting register writes to the HWS scheduler
using a new MAP_PROCESS API, so instead of writing to registers, return
the required register values that the HWS needs to write on debug enable
and disable.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to GFX9 debug devices, set the hardware debug mode by draining
the SPI appropriately prior the mode setting request.
Because GFX10 has waves allocated by the work group boundary and each
SE's SPI instances do not communicate, the SPI drain time is much longer.
This long drain time will be fixed for GFX11 onwards.
Also remove a bunch of deprecated misplaced references for GFX10.3.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX9.4.1, the implicit wait count instruction on s_barrier is
disabled by default in the driver during normal operation for
performance requirements.
There is a hardware bug in GFX9.4.1 where if the implicit wait count
instruction after an s_barrier instruction is disabled, any wave that
hits an exception may step over the s_barrier when returning from the
trap handler with the barrier logic having no ability to be
aware of this, thereby causing other waves to wait at the barrier
indefinitely resulting in a shader hang. This bug has been corrected
for GFX9.4.2 and onward.
Since the debugger subscribes to hardware exceptions, in order to avoid
this bug, the debugger must enable implicit wait count on s_barrier
for a debug session and disable it on detach.
In order to change this setting in the in the device global SQ_CONFIG
register, the GFX pipeline must be idle. GFX9.4.1 as a compute device
will either dispatch work through the compute ring buffers used for
image post processing or through the hardware scheduler by the KFD.
Have the KGD suspend and drain the compute ring buffer, then suspend the
hardware scheduler and block any future KFD process job requests before
changing the implicit wait count setting. Once set, resume all work.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the per-device calls to enable or disable HW debug mode for
GFX9 prior to GFX9.4.1.
GFX9.4.1 and onward will require their own enable/disable sequence as
follow on patches.
When hardware debug mode setting is requested, waves will inherit
these settings in the Shader Processor Input's (SPI) Sequencer Global
Block (SQG). This means that the KGD must drain all waves from the SPI
into SQG (approximately 96 SPI clock cycles) prior to debug mode setting
to ensure that the order of operations that the debugger expects with
regards to debug mode setting transaction requests and wave inheritence
of that mode is upheld.
Also ensure that exception overrides are reset to their original state
prior to debug enable or disable.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users have reported that s2idle wasn't working on OEM Phoenix systems,
but it was root caused to be because `CONFIG_AMD_PMC` wasn't set in
the distribution kernel config.
To make this more apparent, raise the messaging to err instead of warn.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217497
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing debug trap registers references and initialize all debug
registers on boot by clearing the hardware exception overrides and the
wave allocation ID index.
The debugger requires that TTMPs 6 & 7 save the dispatch ID to map
waves onto dispatch during compute context inspection.
In order to correctly set this up, set the special reserved CP bit by
default whenever the MQD is initailized.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the function of amdgpu_bo_vm_destroy to handle the resource release
of shadow bo. During the amdgpu_mes_self_test, shadow bo released, but
vmbo->shadow_list was not, which caused a null pointer reference error
in amdgpu_device_recover_vram when GPU reset.
Fixes: 6c032c37ac ("drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by deleting the deviant arguments.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:799: warning: Excess function parameter 'pcie_index' description in 'amdgpu_device_indirect_wreg'
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:799: warning: Excess function parameter 'pcie_data' description in 'amdgpu_device_indirect_wreg'
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:870: warning: Excess function parameter 'pcie_index' description in 'amdgpu_device_indirect_wreg64'
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:870: warning: Excess function parameter 'pcie_data' description in 'amdgpu_device_indirect_wreg64'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix this warning by adding 'ring' arguments to kdoc.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1128: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib'
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to do -Werror builds on our CI. However, non-amdgpu breakages
have prevented us from doing so thus far. Also, there are a number of
additional checks that we should enable, that the community cares about
and are hidden behind -Wextra. So, define DRM_AMDGPU_WERROR to only
enable -Werror for the amdgpu kernel module and enable -Wextra while
disabling all of the checks that are too noisy.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenny Ho <kenny.ho@amd.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Kenny Ho <Kenny.Ho@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit cf488dcd0a ("drm/amd: Allow s0ix without BIOS support") showed
improvements to power consumption over suspend when s0ix wasn't enabled in
BIOS and the system didn't support S3.
This patch however was misguided because the reason the system didn't
support S3 was because SMT was disabled in OEM BIOS setup.
This prevented the BIOS from allowing S3.
Also allowing GPUs to use the s2idle path actually causes problems if
they're invoked on systems that may not support s2idle in the platform
firmware. `systemd` has a tendency to try to use `s2idle` if `deep` fails
for any reason, which could lead to unexpected flows.
The original commit also fixed a problem during resume from suspend to idle
without hardware support, but this is no longer necessary with commit
ca47518663 ("drm/amd: Don't allow s0ix on APUs older than Raven")
Revert commit cf488dcd0a ("drm/amd: Allow s0ix without BIOS support")
to make it match the expected behavior again.
Cc: Rafael Ávila de Espíndola <rafael@espindo.la>
Link: https://github.com/torvalds/linux/blob/v6.1/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c#L1060
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2599
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set finished fence to ETIME error if job timedout.
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding 'xcp_id' argument.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:160: warning: Function parameter or member 'xcp_id' not described in 'amdgpu_amdkfd_reserve_mem_limit'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding 'inst' arguments to kdocs.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:428: warning: Function parameter or member 'inst' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:626: warning: Function parameter or member 'inst' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c:423: warning: Function parameter or member 'inst' not described in 'gmc_v10_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c:328: warning: Function parameter or member 'inst' not described in 'gmc_v11_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:950: warning: Function parameter or member 'inst' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding 'inst' arguments to kdocs.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:692: warning: Function parameter or member 'inst' not described in 'get_wave_count'
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:763: warning: Function parameter or member 'inst' not described in 'kgd_gfx_v9_get_cu_occupancy'
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding 'xcc_id' arguments.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1557: warning: Function parameter or member 'xcc_id' not described in 'gfx_v7_0_select_se_sh'
drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:38: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_gfx_rlc_enter_safe_mode'
drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:62: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_gfx_rlc_exit_safe_mode'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ASICs which are not initialized through discovery, initialize GFX
cluster as 1.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following gcc with W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:292: warning: Cannot understand * @create_dmamap_sg_bo: Creates a amdgpu_bo object to reflect information
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Address a bunch of kdoc warnings:
gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'job' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'flags' not described in 'sdma_v6_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:946: warning: Function parameter or member 'timeout' not described in 'sdma_v6_0_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1125: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'vmid' not described in 'sdma_v6_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'pd_addr' not described in 'sdma_v6_0_ring_emit_vm_flush'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these warnings by adding & deleting the deviant arguments.
gcc with W=1
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:906: warning: Function parameter or member 'numa_info' not described in 'amdgpu_acpi_get_node_id'
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:906: warning: Excess function parameter 'nid' description in 'amdgpu_acpi_get_node_id'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Address a bunch of kdoc warnings:
gcc with W=1
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:426: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_gfx_stop'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:457: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_rlc_stop'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:470: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_page_stop'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:506: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_ctx_switch_enable'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:794: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_rlc_resume'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:810: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_load_microcode'
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:854: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_start'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add IP GC 11.0.1 in the list of target to have
tmz enabled by default.
Signed-off-by: Ikshwaku Chauhan <ikshwaku.chauhan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can clean up all irq warnings because of unbalanced
amdgpu_irq_get/put when unplugging/unbinding device, and leave
irq count decrease in each ip fini function.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two bugs here.
1) Drop the lock if copy_from_user() fails.
2) If the copy fails then the correct error code is -EFAULT instead of
-EINVAL.
I also broke up the long line and changed "sizeof rd->id" to
"sizeof(rd->id)".
Fixes: 553f973a0d ("drm/amd/amdgpu: Update debugfs for XCC support (v3)")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdxcp platform device as spatial partition device.
-v2: remove unused variable
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Silencing the compiler from below compilation error:
drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c:704:23: error: variable 'mmhub_v1_8_mmea_err_status_reg' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static const uint32_t mmhub_v1_8_mmea_err_status_reg[] = {
^
1 error generated.
Mark the variable as __maybe_unused to make it clear to clang that this
is expected, so there is no more warning.
Cc: Christian König <christian.koenig@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add the base class id for accelerator (lijo)
v3: add the new pci class in amdgpu tree (hawking)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Redirect xcp allocated drm_device::rdev/pdev/driver with
amdgpu pci_device/drm_device setting. They need be saved
before redirect and restored after unregister xcp drm_device.
-v2: fix warning discarded-qualifiers
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since currently APU and dGPU share the same pcie class
while gmc init needs the flag to set up correctly for upcomming
memory allocations
v2: call get_pkg_type in smuio 13_0_3 is enough (hawking)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need init new num_jpeg_rings to 1 on jpeg.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Richard Liang <rliang1@amd.com>
Tested-by: Ying Li <ying.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suggested by FW team that GB_ADDR_CONFIG is handled by golden
settings in driver to get the expected value
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since bios reading does not work currently so just bypass all operations
related to bios
v2: hardcode the vram info for APP_APU case (hawking)
v3: correct the vram_width with channel number * channel size (lijo)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is firmware requirement to set gds_backup_addrlo and gds_backup_addrhi
of DE meta both zero if no gds partition is allocated for the frame.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When MEC executes unmap_queue for mid command buffer preemption, it will
kick the write pointer of the gfx ring, set CP_VMID_PREEMPT to trigger the
preemption and wait for CP_VMID_PREEMPT becomes zero after the preemption
done. There is a race condition that PFP may excute the resetting command
before MEC set CP_VMID_PREEMPT. As a result, hang happens as
CP_VMID_PREEMPT is always 0xffff.
To avoid this, we send resetting CP_VMID_PREEMPT command after the trailing
fence is siganled and update gfx write pointer explicitly.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_disable_kcq’:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:497:6: warning: variable ‘j’ set but not used [-Wunused-but-set-variable]
497 | int j;
| ^
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_disable_kgq’:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:528:6: warning: variable ‘j’ set but not used [-Wunused-but-set-variable]
528 | int j;
| ^
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c: In function ‘amdgpu_gfx_enable_kgq’:
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:630:12: warning: variable ‘j’ set but not used [-Wunused-but-set-variable]
630 | int r, i, j;
|
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gcc with W=1
In file included from drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:33:
drivers/gpu/drm/amd/amdgpu/clearstate_gfx9.h:939:36: warning: ‘gfx9_cs_data’ defined but not used [-Wunused-const-variable=]
939 | static const struct cs_section_def gfx9_cs_data[] = {
|
gfx9_cs_data is not used in gfx_v9_4_3.c, hence remove its
include in gfx_v9_4_3.c
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building with clang's -Wincompatible-function-pointer-types-strict,
which ensures that function pointer signatures match exactly to avoid
tripping clang's Control Flow Integrity (kCFI) checks at run time and
will eventually be turned on for the kernel, the following instances
appear in the NBIOv7.9 code:
drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c:465:32: error: incompatible function pointer types initializing 'int (*)(struct amdgpu_device *)' with an expression of type 'enum amdgpu_gfx_partition (struct amdgpu_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.get_compute_partition_mode = nbio_v7_9_get_compute_partition_mode,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c:467:31: error: incompatible function pointer types initializing 'u32 (*)(struct amdgpu_device *, u32 *)' (aka 'unsigned int (*)(struct amdgpu_device *, unsigned int *)') with an expression of type 'enum amdgpu_memory_partition (struct amdgpu_device *, u32 *)' (aka 'enum amdgpu_memory_partition (struct amdgpu_device *, unsigned int *)') [-Werror,-Wincompatible-function-pointer-types-strict]
.get_memory_partition_mode = nbio_v7_9_get_memory_partition_mode,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 errors generated.
Change the return types of these callbacks to match the prototypes to
clear up the warning and avoid tripping kCFI at run time. Both functions
return a value from ffs(), which is an integer that can fit into either
int or unsigned int.
Fixes: 98a54e88e8 ("drm/amdgpu: add sysfs node for compute partition mode")
Fixes: ea2d2f8ece ("drm/amdgpu: detect current GPU memory partition mode")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: Only single copy per instance type is required for PSP. All instance types
use the same firmware copy. (Lijo)
v2: Apply the change into amdgpu_sdma_init_microcode() due to rebase. (Morris)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will simplify code.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sched.ready is nothing with ring initialization, it needs to set
to be true after ring/IB test in amdgpu_ring_test_helper to tell
the ring is ready for submission.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sched.ready is nothing with ring initialization, it needs to set
to be true after ring/IB test in amdgpu_ring_test_helper to tell
the ring is ready for submission.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
checkpatch reports:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for any arm of this statement
+ if (nvec <= 0) {
[...]
+ } else {
[...]
WARNING: Block comments use a trailing */ on a separate line
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a low priority DRM scheduler for VRAM clearing instead of using
the exisiting high priority scheduler. Use the high priority scheduler
for migrations and evictions.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional modification involved.
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:374: warning: expecting prototype for vcn_v4_0_mc_resume_dpg_mode(). Prototype was for vcn_v4_0_3_mc_resume_dpg_mode() instead.
drivers/gpu/drm/amd/amdgpu/vcn_v4_0_3.c:631: warning: expecting prototype for vcn_v4_0_enable_clock_gating(). Prototype was for vcn_v4_0_3_enable_clock_gating() instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=5284
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional modification involved.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:426: warning: expecting prototype for sdma_v4_4_2_gfx_stop(). Prototype was for sdma_v4_4_2_inst_gfx_stop() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:457: warning: expecting prototype for sdma_v4_4_2_rlc_stop(). Prototype was for sdma_v4_4_2_inst_rlc_stop() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:470: warning: expecting prototype for sdma_v4_4_2_page_stop(). Prototype was for sdma_v4_4_2_inst_page_stop() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:506: warning: expecting prototype for sdma_v4_4_2_ctx_switch_enable(). Prototype was for sdma_v4_4_2_inst_ctx_switch_enable() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:561: warning: expecting prototype for sdma_v4_4_2_enable(). Prototype was for sdma_v4_4_2_inst_enable() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:798: warning: expecting prototype for sdma_v4_4_2_rlc_resume(). Prototype was for sdma_v4_4_2_inst_rlc_resume() instead.
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:814: warning: expecting prototype for sdma_v4_4_2_load_microcode(). Prototype was for sdma_v4_4_2_inst_load_microcode() instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=5283
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: amdgpu_xcp.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=5281
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The compute partition memory size calculated from KFD_XCP_MEMORY_SIZE
may not align to page size if xcp_mgr->num_xcp_per_mem_partition is 6.
Change the KFD_XCP_MEMORY_SIZE macro to return page align size, so KFD
node memory size reported in sysfs is page align size, to avoid
application VRAM allocation failure because application may use the size
directly and Thunk requires the memory allocation size is page size
align.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
