The following sequence is basically illegal when dev was fetched
without lookup because dev_net(dev) might be different after holding
rtnl_net_lock():
net = dev_net(dev);
rtnl_net_lock(net);
Let's use rtnl_net_dev_lock() in unregister_netdev().
Note that there is no real bug in unregister_netdev() for now
because RTNL protects the scope even if dev_net(dev) is changed
before/after RTNL.
Fixes: 00fb982393 ("dev: Hold per-netns RTNL in (un)?register_netdev().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the cited commit, dev_net(dev) is fetched before holding RTNL
and passed to __unregister_netdevice_notifier_net().
However, dev_net(dev) might be different after holding RTNL.
In the reported case [0], while removing a VF device, its netns was
being dismantled and the VF was moved to init_net.
So the following sequence is basically illegal when dev was fetched
without lookup:
net = dev_net(dev);
rtnl_net_lock(net);
Let's use a new helper rtnl_net_dev_lock() to fix the race.
It fetches dev_net_rcu(dev), bumps its net->passive, and checks if
dev_net_rcu(dev) is changed after rtnl_net_lock().
[0]:
BUG: KASAN: slab-use-after-free in notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
Read of size 8 at addr ffff88810cefb4c8 by task test-bridge-lag/21127
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:489)
kasan_report (mm/kasan/report.c:604)
notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
call_netdevice_notifiers_info (net/core/dev.c:2011)
unregister_netdevice_many_notify (net/core/dev.c:11551)
unregister_netdevice_queue (net/core/dev.c:11487)
unregister_netdev (net/core/dev.c:11635)
mlx5e_remove (drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6552 drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6579) mlx5_core
auxiliary_bus_remove (drivers/base/auxiliary.c:230)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
bus_remove_device (./include/linux/kobject.h:193 drivers/base/base.h:73 drivers/base/bus.c:583)
device_del (drivers/base/power/power.h:142 drivers/base/core.c:3855)
mlx5_rescan_drivers_locked (./include/linux/auxiliary_bus.h:241 drivers/net/ethernet/mellanox/mlx5/core/dev.c:333 drivers/net/ethernet/mellanox/mlx5/core/dev.c:535 drivers/net/ethernet/mellanox/mlx5/core/dev.c:549) mlx5_core
mlx5_unregister_device (drivers/net/ethernet/mellanox/mlx5/core/dev.c:468) mlx5_core
mlx5_uninit_one (./include/linux/instrumented.h:68 ./include/asm-generic/bitops/instrumented-non-atomic.h:141 drivers/net/ethernet/mellanox/mlx5/core/main.c:1563) mlx5_core
remove_one (drivers/net/ethernet/mellanox/mlx5/core/main.c:965 drivers/net/ethernet/mellanox/mlx5/core/main.c:2019) mlx5_core
pci_device_remove (./include/linux/pm_runtime.h:129 drivers/pci/pci-driver.c:475)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
unbind_store (drivers/base/bus.c:245)
kernfs_fop_write_iter (fs/kernfs/file.c:338)
vfs_write (fs/read_write.c:587 (discriminator 1) fs/read_write.c:679 (discriminator 1))
ksys_write (fs/read_write.c:732)
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f6a4d5018b7
Fixes: 7fb1073300 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().")
Reported-by: Yael Chemla <ychemla@nvidia.com>
Closes: https://lore.kernel.org/netdev/146eabfe-123c-4970-901e-e961b4c09bc3@nvidia.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix incorrect data offset read in the pd692x0_pi_get_pw_limit callback.
The issue was previously unnoticed as it was only used by the regulator
API and not thoroughly tested, since the PSE is mainly controlled via
ethtool.
The function became actively used by ethtool after commit 3e9dbfec49
("net: pse-pd: Split ethtool_get_status into multiple callbacks"),
which led to the discovery of this issue.
Fix it by using the correct data offset.
Fixes: a87e699c9d ("net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250217134812.1925345-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We requested in the past that GVE patches coming out of Google should
be submitted only by GVE maintainers. There were too many patches
posted which didn't follow the subsystem guidance.
Recently Joshua was added to maintainers, but even tho he was asked
to follow the netdev "FAQ" in the past [1] he does not follow
the local customs. It is not reasonable for a person who hasn't read
the maintainer entry for the subsystem to be a driver maintainer.
We can re-add once Joshua does some on-list reviews to prove
the fluency with the upstream process.
Link: https://lore.kernel.org/20240610172720.073d5912@kernel.org # [1]
Link: https://patch.msgid.link/20250215162646.2446559-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch the NETDEV_XDP_ACT_NDO_XMIT XDP feature flag is set by
default as part of driver initialization, and is never cleared. However,
this flag differs from others in that it is used as an indicator for
whether the driver is ready to perform the ndo_xdp_xmit operation as
part of an XDP_REDIRECT. Kernel helpers
xdp_features_(set|clear)_redirect_target exist to convey this meaning.
This patch ensures that the netdev is only reported as a redirect target
when XDP queues exist to forward traffic.
Fixes: 39a7f4aa3e ("gve: Add XDP REDIRECT support for GQI-QPL format")
Cc: stable@vger.kernel.org
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20250214224417.1237818-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit under Fixes we set the window clamp in accordance
to newly measured rcvbuf scaling_ratio. If the scaling_ratio
decreased significantly we may put ourselves in a situation
where windows become smaller than rcvq_space, preventing
tcp_rcv_space_adjust() from increasing rcvbuf.
The significant decrease of scaling_ratio is far more likely
since commit 697a6c8cec ("tcp: increase the default TCP scaling ratio"),
which increased the "default" scaling ratio from ~30% to 50%.
Hitting the bad condition depends a lot on TCP tuning, and
drivers at play. One of Meta's workloads hits it reliably
under following conditions:
- default rcvbuf of 125k
- sender MTU 1500, receiver MTU 5000
- driver settles on scaling_ratio of 78 for the config above.
Initial rcvq_space gets calculated as TCP_INIT_CWND * tp->advmss
(10 * 5k = 50k). Once we find out the true scaling ratio and
MSS we clamp the windows to 38k. Triggering the condition also
depends on the message sequence of this workload. I can't repro
the problem with simple iperf or TCP_RR-style tests.
Fixes: a2cbb16039 ("tcp: Update window clamping condition")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250217232905.3162187-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michal Luczaj says:
====================
sockmap, vsock: For connectible sockets allow only connected
Series deals with one more case of vsock surprising BPF/sockmap by being
inconsistency about (having an) assigned transport.
KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127]
CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:vsock_read_skb+0x4b/0x90
Call Trace:
sk_psock_verdict_data_ready+0xa4/0x2e0
virtio_transport_recv_pkt+0x1ca8/0x2acc
vsock_loopback_work+0x27d/0x3f0
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x35a/0x700
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
This bug, similarly to commit f6abafcd32 ("vsock/bpf: return early if
transport is not assigned"), could be fixed with a single NULL check. But
instead, let's explore another approach: take a hint from
vsock_bpf_update_proto() and teach sockmap to accept only vsocks that are
already connected (no risk of transport being dropped or reassigned). At
the same time straight reject the listeners (vsock listening sockets do not
carry any transport anyway). This way BPF does not have to worry about
vsk->transport becoming NULL.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================
Link: https://patch.msgid.link/20250213-vsock-listen-sockmap-nullptr-v1-0-994b7cd2f16b@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Verify that for a connectible AF_VSOCK socket, merely having a transport
assigned is insufficient; socket must be connected for the sockmap to
accept.
This does not test datagram vsocks. Even though it hardly matters. VMCI is
the only transport that features VSOCK_TRANSPORT_F_DGRAM, but it has an
unimplemented vsock_transport::readskb() callback, making it unsupported by
BPF/sockmap.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 515745445e ("selftest/bpf: Add test for vsock removal from sockmap
on close()") added test that checked if proto::close() callback was invoked
on AF_VSOCK socket release. I.e. it verified that a close()d vsock does
indeed get removed from the sockmap.
It was done simply by creating a socket pair and attempting to replace a
close()d one with its peer. Since, due to a recent change, sockmap does not
allow updating index with a non-established connectible vsock, redo it with
a freshly established one.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the spirit of commit 91751e2482 ("vsock: prevent null-ptr-deref in
vsock_*[has_data|has_space]"), armorize the "impossible" cases with a
warning.
Fixes: 634f1a7110 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sockmap expects all vsocks to have a transport assigned, which is expressed
in vsock_proto::psock_update_sk_prot(). However, there is an edge case
where an unconnected (connectible) socket may lose its previously assigned
transport. This is handled with a NULL check in the vsock/BPF recv path.
Another design detail is that listening vsocks are not supposed to have any
transport assigned at all. Which implies they are not supported by the
sockmap. But this is complicated by the fact that a socket, before
switching to TCP_LISTEN, may have had some transport assigned during a
failed connect() attempt. Hence, we may end up with a listening vsock in a
sockmap, which blows up quickly:
KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127]
CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:vsock_read_skb+0x4b/0x90
Call Trace:
sk_psock_verdict_data_ready+0xa4/0x2e0
virtio_transport_recv_pkt+0x1ca8/0x2acc
vsock_loopback_work+0x27d/0x3f0
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x35a/0x700
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
For connectible sockets, instead of relying solely on the state of
vsk->transport, tell sockmap to only allow those representing established
connections. This aligns with the behaviour for AF_INET and AF_UNIX.
Fixes: 634f1a7110 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir implemented the MAC merge support and reviews all
the new driver implementations.
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250215225200.2652212-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, after successfully flushing the xmit buffer to VIOS,
the tx_bytes stat was incremented by the length of the skb.
It is invalid to access the skb memory after sending the buffer to
the VIOS because, at any point after sending, the VIOS can trigger
an interrupt to free this memory. A race between reading skb->len
and freeing the skb is possible (especially during LPM) and will
result in use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
Read of size 4 at addr c00000024eb48a70 by task hxecom/14495
<...>
Call Trace:
[c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable)
[c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0
[c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8
[c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0
[c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
[c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358
<...>
Freed by task 0:
kasan_save_stack+0x34/0x68
kasan_save_track+0x2c/0x50
kasan_save_free_info+0x64/0x108
__kasan_mempool_poison_object+0x148/0x2d4
napi_skb_cache_put+0x5c/0x194
net_tx_action+0x154/0x5b8
handle_softirqs+0x20c/0x60c
do_softirq_own_stack+0x6c/0x88
<...>
The buggy address belongs to the object at c00000024eb48a00 which
belongs to the cache skbuff_head_cache of size 224
==================================================================
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250214155233.235559-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to device_release() in /drivers/base/core.c,
a device without a release function is a broken device
and must be fixed.
The current code directly frees the device after calling device_add()
without waiting for other kernel parts to release their references.
Thus, a reference could still be held to a struct device,
e.g., by sysfs, leading to potential use-after-free
issues if a proper release function is not set.
Fixes: 8c81ba2034 ("net/smc: De-tangle ism and smc device initialization")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250214120137.563409-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can
return 1 if the allocation succeeded after wrapping. This was treated as
an error, with value 1 returned to caller tcf_exts_init_ex() which sets
exts->actions to NULL and returns 1 to caller fl_change().
fl_change() treats err == 1 as success, calling tcf_exts_validate_ex()
which calls tcf_action_init() with exts->actions as argument, where it
is dereferenced.
Example trace:
BUG: kernel NULL pointer dereference, address: 0000000000000000
CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1
RIP: 0010:tcf_action_init+0x1f8/0x2c0
Call Trace:
tcf_action_init+0x1f8/0x2c0
tcf_exts_validate_ex+0x175/0x190
fl_change+0x537/0x1120 [cls_flower]
Fixes: 80cd22c35c ("net/sched: cls_api: Support hardware miss to tc action")
Signed-off-by: Pierre Riteau <pierre@stackhpc.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250213223610.320278-1-pierre@stackhpc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When executing suspend to ram twice in a row,
the `rx_buf_nr` and `rx_buf_max_nr` increase to three times vq->num_free.
Then after virtqueue_get_buf and `rx_buf_nr` decreased
in function virtio_transport_rx_work,
the condition to fill rx buffer
(rx_buf_nr < rx_buf_max_nr / 2) will never be met.
It is because that `rx_buf_nr` and `rx_buf_max_nr`
are initialized only in virtio_vsock_probe(),
but they should be reset whenever virtqueues are recreated,
like after a suspend/resume.
Move the `rx_buf_nr` and `rx_buf_max_nr` initialization in
virtio_vsock_vqs_init(), so we are sure that they are properly
initialized, every time we initialize the virtqueues, either when we
load the driver or after a suspend/resume.
To prevent erroneous atomic load operations on the `queued_replies`
in the virtio_transport_send_pkt_work() function
which may disrupt the scheduling of vsock->rx_work
when transmitting reply-required socket packets,
this atomic variable must undergo synchronized initialization
alongside the preceding two variables after a suspend/resume.
Fixes: bd50c5dc18 ("vsock/virtio: add support for device suspend/resume")
Link: https://lore.kernel.org/virtualization/20250207052033.2222629-1-junnan01.wu@samsung.com/
Co-developed-by: Ying Gao <ying01.gao@samsung.com>
Signed-off-by: Ying Gao <ying01.gao@samsung.com>
Signed-off-by: Junnan Wu <junnan01.wu@samsung.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250214012200.1883896-1-junnan01.wu@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using the Qualcomm X55 modem on the ThinkPad X13s, the kernel log is
constantly being filled with errors related to a "sequence number glitch",
e.g.:
[ 1903.284538] sequence number glitch prev=16 curr=0
[ 1913.812205] sequence number glitch prev=50 curr=0
[ 1923.698219] sequence number glitch prev=142 curr=0
[ 2029.248276] sequence number glitch prev=1555 curr=0
[ 2046.333059] sequence number glitch prev=70 curr=0
[ 2076.520067] sequence number glitch prev=272 curr=0
[ 2158.704202] sequence number glitch prev=2655 curr=0
[ 2218.530776] sequence number glitch prev=2349 curr=0
[ 2225.579092] sequence number glitch prev=6 curr=0
Internet connectivity is working fine, so this error seems harmless. It
looks like modem does not preserve the sequence number when entering low
power state; the amount of errors depends on how actively the modem is
being used.
A similar issue has also been seen on USB-based MBIM modems [1]. However,
in cdc_ncm.c the "sequence number glitch" message is a debug message
instead of an error. Apply the same to the mhi_wwan_mbim.c driver to
silence these errors when using the modem.
[1]: https://lists.freedesktop.org/archives/libmbim-devel/2016-November/000781.html
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250212-mhi-wwan-mbim-sequence-glitch-v1-1-503735977cbd@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo steps down after serving as the WiFi driver maintainer
for over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth: stmmac: correct Rx buffer layout when SPH is enabled
- rxrpc: fix alteration of headers whilst zerocopy pending
- eth: iavf: fix a locking bug in an error path
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags,
changes the uAPI but this uAPI was not in any release yet
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmeuOoMACgkQMUZtbf5S
Irs43w/+M9ZRNqU7O1CK6kykgAkuWCZvfVvvKFCTKcxg+ibrelzn78m1CtFWfpci
aZ6meM65XQ/9a8y4VQgjMs8dDPSQphLXjXTLRtMLCEbL6Wakg6pobj/Rb/Ya4p9T
4Ao7VrCRzAbGDv/M4NXSuqVxc1YYBXA3i3FSKR913cMsYeTMOYLRvjsB8ZvSJOgK
Qs4iGYz3D/oO0KRHVWpzn1DUxQhwoqSjU1lFeuLc+1yxDmicqqkKnnP0A6DbN4zd
/JMVkM1ysAqKh4HNDdurMhy5D42Gdc/W/QfLJiNtpohNO2wItR9cs+Nn4TMnCvpF
DK4tS1z5V60S/t0G8isVAjtZYGcBL2hlC94H/8m/FztUdoVew2vaAlD3Fa2i0ED0
7Q9vzNHUfUSYfI2QLYJC+QHXBkzSiU18uK3zIFq/sIOZJco1Wz8Aevg78c2JV+Qi
nZLyyeH73Yt1lINBK5/td+KBFSVlMI5gAAGMVuH4+djLOOQohiufe5uKVlU/vjZ0
o2YTiIXRwhvAe2QIbjbZV1y4xhWLrH+NXhKYzRZZfTgx2wjLFVovjCfodQjskjNk
fVp5wg3m9qKO3MkEN+NTFcnZytUmpNgC1LqXLEMCOfccU+vDqQ+0xylNhEipSuWd
PW5c/dcoVnDARvxGVp1wWtEy83kF1RefgIp++wqSzSqisr2l2l4=
=7lE+
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
-----BEGIN PGP SIGNATURE-----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=0hI+
-----END PGP SIGNATURE-----
Merge tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix stale page cache after race between readahead and direct IO write
- fix hole expansion when writing at an offset beyond EOF, the range
will not be zeroed
- use proper way to calculate offsets in folio ranges
* tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix hole expansion when writing at an offset beyond EOF
btrfs: fix stale page cache after race between readahead and direct IO write
btrfs: fix two misuses of folio_shift()
- More fixes for going read-only: the previous fix was insufficient, but
with more work on ordering journal reclaim flushing (and a btree node
accounting fix so we don't split until we have to) the
tiering_replication test now consistently goes read-only in less than
a second.
- fix for fsck when we have reflink pointers to missing indirect
extents
- some transaction restart handling fixes from Alan; the "Pass
_orig_restart_count to trans_was_restarted" likely fixes some rare
undefined behaviour heisenbugs.
-----BEGIN PGP SIGNATURE-----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=qdkE
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Just small stuff.
As a general announcement, on disk format is now frozen in my master
branch - future on disk format changes will be optional, not required.
- More fixes for going read-only: the previous fix was insufficient,
but with more work on ordering journal reclaim flushing (and a
btree node accounting fix so we don't split until we have to) the
tiering_replication test now consistently goes read-only in less
than a second.
- fix for fsck when we have reflink pointers to missing indirect
extents
- some transaction restart handling fixes from Alan; the "Pass
_orig_restart_count to trans_was_restarted" likely fixes some rare
undefined behaviour heisenbugs"
* tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefs:
bcachefs: Reuse transaction
bcachefs: Pass _orig_restart_count to trans_was_restarted
bcachefs: CONFIG_BCACHEFS_INJECT_TRANSACTION_RESTARTS
bcachefs: Fix want_new_bset() so we write until the end of the btree node
bcachefs: Split out journal pins by btree level
bcachefs: Fix use after free
bcachefs: Fix marking reflink pointers to missing indirect extents
Fix a deadlock in pse_pi_get_current_limit and pse_pi_set_current_limit
caused by consecutive mutex_lock calls. One in the function itself and
another in pse_pi_get_voltage.
Resolve the issue by using the unlocked version of pse_pi_get_voltage
instead.
Fixes: e0a5e2bba3 ("net: pse-pd: Use power limit at driver side instead of current limit")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250212151751.1515008-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc path MTU discovery currently only makes use of ICMPv4, but not
ICMPv6, which means that pmtud for IPv6 doesn't work correctly. Fix it to
check for ICMPv6 messages also.
Fixes: eeaedc5449 ("rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/3517283.1739359284@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZZ4N
-----END PGP SIGNATURE-----
Merge tag 'nf-25-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains one revert for:
1) Revert flowtable entry teardown cycle when skbuff exceeds mtu to
deal with DF flag unset scenarios. This is reverts a patch coming
in the previous merge window (available in 6.14-rc releases).
* tag 'nf-25-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
====================
Link: https://patch.msgid.link/20250213100502.3983-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 011b033590.
Sabrina reports that the revert may trigger warnings due to intervening
changes, especially the ability to rise MAX_SKB_FRAGS. Let's drop it
and revisit once that part is also ironed out.
Fixes: 011b033590 ("Revert "net: skb: introduce and use a single page frag cache"")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/6bf54579233038bc0e76056c5ea459872ce362ab.1739375933.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=O6uZ
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs about idle, kernel_page_present(), IP checksum and KVM, plus
some trival cleanups"
* tag 'loongarch-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Set host with kernel mode when switch to VM mode
LoongArch: KVM: Remove duplicated cache attribute setting
LoongArch: KVM: Fix typo issue about GCFG feature detection
LoongArch: csum: Fix OoB access in IP checksum code for negative lengths
LoongArch: Remove the deprecated notifier hook mechanism
LoongArch: Use str_yes_no() helper function for /proc/cpuinfo
LoongArch: Fix kernel_page_present() for KPRANGE/XKPRANGE
LoongArch: Fix idle VS timer enqueue
Fixes and new HW support:
- thinkpad_acpi:
- Fix registration of tpacpi platform driver
- Support fan speed in ticks per revolution (Thinkpad X120e)
- Support V9 DYTC profiles (new Thinkpad AMD platforms)
- int3472: Handle GPIO "enable" vs "reset" variation (ov7251)
The following is an automated shortlog grouped by driver:
int3472:
- Call "reset" GPIO "enable" for INT347E
- Use correct type for "polarity", call it gpio_flags
thinkpad_acpi:
- Fix invalid fan speed on ThinkPad X120e
- Fix registration of tpacpi platform driver
- Support for V9 DYTC platform profiles
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ63igAAKCRBZrE9hU+XO
MW/TAQDbeIrh8Oy17XBXVYUMcLhuyQNGXQLQntMzxPzCL+aL7AD/T39y8bZFWlYg
lEvrv4B/YOjCZyfcst8lR7RrcMFo/Qs=
=olZn
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix registration of tpacpi platform driver
- Support fan speed in ticks per revolution (Thinkpad X120e)
- Support V9 DYTC profiles (new Thinkpad AMD platforms)
- int3472: Handle GPIO "enable" vs "reset" variation (ov7251)
* tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix registration of tpacpi platform driver
platform/x86: int3472: Call "reset" GPIO "enable" for INT347E
platform/x86: int3472: Use correct type for "polarity", call it gpio_flags
platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles
platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e
Add a check for the return value of mlxsw_sp_port_get_stats_raw()
in __mlxsw_sp_port_get_stats(). If mlxsw_sp_port_get_stats_raw()
returns an error, exit the function to prevent further processing
with potentially invalid data.
Fixes: 614d509aa1 ("mlxsw: Move ethtool_ops to spectrum_ethtool.c")
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250212152311.1332-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mld_newpack() can be called without RTNL or RCU being held.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection.
Fixes: b8ad0cbc58 ("[NETNS][IPV6] mcast - handle several network namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250212141021.1663666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs
to wait for this before sending other command. This patch fixes the potential
miss of alive interrupt due to which HCI_OP_RESET can timeout.
Expected flow:
If tx command is HCI_OP_RESET,
1. set data->gp0_received = false
2. send HCI_OP_RESET
3. wait for alive interrupt
Actual flow having potential race:
If tx command is HCI_OP_RESET,
1. send HCI_OP_RESET
1a. Firmware raises alive interrupt here and in ISR
data->gp0_received is set to true
2. set data->gp0_received = false
3. wait for alive interrupt
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 05c200c8f0 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For XDP transmit case, swdata doesn't contain SKB but the
XDP Frame. Infer the correct swdata based on buffer type
and return the XDP Frame for XDP transmit case.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Fixes: 8acacc40f7 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-3-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For successful XDP_TX and XDP_REDIRECT cases, the packet was received
successfully so update RX statistics. Use original received
packet length for that.
TX packets statistics are incremented on TX completion so don't
update it while TX queueing.
If xdp_convert_buff_to_frame() fails, increment tx_dropped.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Fixes: 8acacc40f7 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-2-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the XDP program doesn't result in XDP_PASS then we leak the
memory allocated by am65_cpsw_build_skb().
It is pointless to allocate SKB memory before running the XDP
program as we would be wasting CPU cycles for cases other than XDP_PASS.
Move the SKB allocation after evaluating the XDP program result.
This fixes the memleak. A performance boost is seen for XDP_DROP test.
XDP_DROP test:
Before: 460256 rx/s 0 err/s
After: 784130 rx/s 0 err/s
Fixes: 8acacc40f7 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-1-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PRMD register is only meaningful on the beginning stage of exception
entry, and it is overwritten with nested irq or exception.
When CPU runs in VM mode, interrupt need be enabled on host. And the
mode for host had better be kernel mode rather than random or user mode.
When VM is running, the running mode with top command comes from CRMD
register, and running mode should be kernel mode since kernel function
is executing with perf command. It needs be consistent with both top and
perf command.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Cache attribute comes from GPA->HPA secondary mmu page table and is
configured when kvm is enabled. It is the same for all VMs, so remove
duplicated cache attribute setting on vCPU context switch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This is typo issue and misusage about GCFG feature macro. The code
is wrong, only that it does not cause obvious problem since GCFG is
set again on vCPU context switch.
Fixes: 0d0df3c99d ("LoongArch: KVM: Implement kvm hardware enable, disable interface")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit 69e3a6aa6b ("LoongArch: Add checksum optimization for 64-bit
system") would cause an undefined shift and an out-of-bounds read.
Commit 8bd795fedb ("arm64: csum: Fix OoB access in IP checksum code
for negative lengths") fixes the same issue on ARM64.
Fixes: 69e3a6aa6b ("LoongArch: Add checksum optimization for 64-bit system")
Co-developed-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The notifier hook mechanism in proc and cpuinfo is actually unnecessary
for LoongArch because it's not used anywhere.
It was originally added to the MIPS code in commit d6d3c9afaa ("MIPS:
MT: proc: Add support for printing VPE and TC ids"), and LoongArch then
inherited it.
But as the kernel code stands now, this notifier hook mechanism doesn't
really make sense for either LoongArch or MIPS.
In addition, the seq_file forward declaration needs to be moved to its
proper place, as only the show_ipi_list() function in smp.c requires it.
Co-developed-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
