The check_host_shared_guest() path expects to find a last-level valid
PTE in the guest's stage-2 page-table. However, it checks the PTE's
level before its validity, which makes it hard for callers to figure out
what went wrong.
To make error handling simpler, check the PTE's validity first.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250207145438.1333475-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The way we deal with the EL2 virtual timer is a bit odd.
We try to cope with E2H being flipped, and adjust which offset
applies to that timer depending on the current E2H value. But that's
a complexity we shouldn't have to worry about.
What we have to deal with is either E2H being RES1, in which case
there is no offset, or E2H being RES0, and the virtual timer simply
does not exist.
Drop the adjusting of the timer offset, which makes things a bit
simpler. At the same time, make sure that accessing the HV timer
when E2H is RES0 results in an UNDEF in the guest.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250204110050.150560-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Both Wei-Lin Chang and Volodymyr Babchuk report that the way we
handle the emulation of EL1 timers with NV is completely wrong,
specially in the case of HCR_EL2.E2H==0.
There are three problems in about as many lines of code:
- With E2H==0, the EL1 timers are overwritten with the EL1 state,
while they should actually contain the EL2 state (as per the timer
map)
- With E2H==1, we run the full EL1 timer emulation even when ECV
is present, hiding a bug in timer_emulate() (see previous patch)
- The comments are actively misleading, and say all the wrong things.
This is only attributable to the code having been initially written
for FEAT_NV, hacked up to handle FEAT_NV2 *in parallel*, and vaguely
hacked again to be FEAT_NV2 only. Oh, and yours truly being a gold
plated idiot.
The fix is obvious: just delete most of the E2H==0 code, have a unified
handling of the timers (because they really are E2H agnostic), and
make sure we don't execute any of that when FEAT_ECV is present.
Fixes: 4bad3068cf ("KVM: arm64: nv: Sync nested timer state with FEAT_NV2")
Reported-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Reported-by: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
Link: https://lore.kernel.org/r/fqiqfjzwpgbzdtouu2pwqlu7llhnf5lmy4hzv5vo6ph4v3vyls@jdcfy3fjjc5k
Link: https://lore.kernel.org/r/87frl51tse.fsf@epam.com
Tested-by: Dmytro Terletskyi <dmytro_terletskyi@epam.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250204110050.150560-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
When updating the interrupt state for an emulated timer, we return
early and skip the setup of a soft timer that runs in parallel
with the guest.
While this is OK if we have set the interrupt pending, it is pretty
wrong if the guest moved CVAL into the future. In that case,
no timer is armed and the guest can wait for a very long time
(it will take a full put/load cycle for the situation to resolve).
This is specially visible with EDK2 running at EL2, but still
using the EL1 virtual timer, which in that case is fully emulated.
Any key-press takes ages to be captured, as there is no UART
interrupt and EDK2 relies on polling from a timer...
The fix is simply to drop the early return. If the timer interrupt
is pending, we will still return early, and otherwise arm the soft
timer.
Fixes: 4d74ecfa64 ("KVM: arm64: Don't arm a hrtimer for an already pending timer")
Cc: stable@vger.kernel.org
Tested-by: Dmytro Terletskyi <dmytro_terletskyi@epam.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250204110050.150560-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
For each vcpu that userspace creates, we allocate a number of
s2_mmu structures that will eventually contain our shadow S2
page tables.
Since this is a dynamically allocated array, we reallocate
the array and initialise the newly allocated elements. Once
everything is correctly initialised, we adjust pointer and size
in the kvm structure, and move on.
But should that initialisation fail *and* the reallocation triggered
a copy to another location, we end-up returning early, with the
kvm structure still containing the (now stale) old pointer. Weeee!
Cure it by assigning the pointer early, and use this to perform
the initialisation. If everything succeeds, we adjust the size.
Otherwise, we just leave the size as it was, no harm done, and the
new memory is as good as the ol' one (we hope...).
Fixes: 4f128f8e1a ("KVM: arm64: nv: Support multiple nested Stage-2 mmu structures")
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20250204145554.774427-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The recent changes to debug state management broke self-hosted debug for
guests when running in protected mode, since both the debug owner and
the debug state itself aren't shared with the hyp's view of the vcpu.
Fix it by flushing/syncing the relevant bits with the hyp vcpu.
Fixes: beb470d96c ("KVM: arm64: Use debug_owner to track if debug regs need save/restore")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/kvmarm/5f62740f-a065-42d9-9f56-8fb648b9c63f@sirena.org.uk/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250131222922.1548780-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
To determine CPU features during initialization, the nVHE hypervisor
utilizes sanitized values of the host's CPU features registers. These
values, stored in u64 idaa64*_el1_sys_val variables are updated by the
kvm_hyp_init_symbols() function at EL1. To ensure EL2 visibility with
the MMU off, the data cache needs to be flushed after these updates.
However, individually flushing each variable using
kvm_flush_dcache_to_poc() is inefficient.
These cpu feature variables would be part of the bss section of
the hypervisor. Hence, flush the entire bss section of hypervisor
once the initialization is complete.
Fixes: 6c30bfb18d ("KVM: arm64: Add handlers for protected VM System Registers")
Suggested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@google.com>
Link: https://lore.kernel.org/r/20250121044016.2219256-1-lokeshvutla@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
There is no such thing as TRFCR_ELx in the architecture.
What we have is TRFCR_EL1, for which TRFCR_EL12 is an accessor.
Rename TRFCR_ELx_* to TRFCR_EL1_*, and fix the bit of code using
these names.
Similarly, TRFCR_EL12 is redefined as a mapping to TRFCR_EL1.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/87cygsqgkh.wl-maz@kernel.org
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
* kvm-arm64/misc-6.14:
: .
: Misc KVM/arm64 changes for 6.14
:
: - Don't expose AArch32 EL0 capability when NV is enabled
:
: - Update documentation to reflect the full gamut of kvm-arm.mode
: behaviours
:
: - Use the hypervisor VA bit width when dumping stacktraces
:
: - Decouple the hypervisor stack size from PAGE_SIZE, at least
: on the surface...
:
: - Make use of str_enabled_disabled() when advertising GICv4.1 support
:
: - Explicitly handle BRBE traps as UNDEFINED
: .
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
Documentation: Update the behaviour of "kvm-arm.mode"
KVM: arm64: nv: Advertise the lack of AArch32 EL0 support
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/nv-resx-fixes-6.14:
: .
: Fixes for NV sysreg accessors. From the cover letter:
:
: "Joey recently reported that some rather basic tests were failing on
: NV, and managed to track it down to critical register fields (such as
: HCR_EL2.E2H) not having their expect value.
:
: Further investigation has outlined a couple of critical issues:
:
: - Evaluating HCR_EL2.E2H must always be done with a sanitising
: accessor, no ifs, no buts. Given that KVM assumes a fixed value for
: this bit, we cannot leave it to the guest to mess with.
:
: - Resetting the sysreg file must result in the RESx bits taking
: effect. Otherwise, we may end-up making the wrong decision (see
: above), and we definitely expose invalid values to the guest. Note
: that because we compute the RESx masks very late in the VM setup, we
: need to apply these masks at that particular point as well.
: [...]"
: .
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/nested.c
* kvm-arm64/coresight-6.14:
: .
: Trace filtering update from James Clark. From the cover letter:
:
: "The guest filtering rules from the Perf session are now honored for both
: nVHE and VHE modes. This is done by either writing to TRFCR_EL12 at the
: start of the Perf session and doing nothing else further, or caching the
: guest value and writing it at guest switch for nVHE. In pKVM, trace is
: now be disabled for both protected and unprotected guests."
: .
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/pkvm-memshare-declutter:
: .
: pKVM memory transition simplifications, courtesy of Quentin Perret.
:
: From the cover letter:
: "Since its early days, pKVM has formalized memory 'transitions' (shares
: and donations) using 'struct pkvm_mem_transition' and bunch of helpers
: to manipulate it. The intention was for all transitions to use this
: machinery to ensure we're checking things consistently. However, as
: development progressed, it became clear that the rigidity of this model
: made it really difficult to use in some use-cases which ended-up
: side-stepping it entirely. That is the case for the
: hyp_{un}pin_shared_mem() and host_{un}share_guest() paths upstream which
: use lower level helpers directly, as well as for several other pKVM
: features that should land upstream in the future (ex: when a guest
: relinquishes a page during ballooning, when annotating a page that is
: being DMA'd to, ...). On top of this, the pkvm_mem_transition machinery
: requires a lot of boilerplate which makes the code hard to read, but
: also adds layers of indirection that no compilers seems to see through,
: hence leading to suboptimal generated code.
:
: Given all the above, this series removes the pkvm_mem_transition
: machinery from mem_protect.c, and converts all its users to use
: __*_{check,set}_page_state_range() low-level helpers directly."
: .
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/nv-timers:
: .
: Nested Virt support for the EL2 timers. From the initial cover letter:
:
: "Here's another batch of NV-related patches, this time bringing in most
: of the timer support for EL2 as well as nested guests.
:
: The code is pretty convoluted for a bunch of reasons:
:
: - FEAT_NV2 breaks the timer semantics by redirecting HW controls to
: memory, meaning that a guest could setup a timer and never see it
: firing until the next exit
:
: - We go try hard to reflect the timer state in memory, but that's not
: great.
:
: - With FEAT_ECV, we can finally correctly emulate the virtual timer,
: but this emulation is pretty costly
:
: - As a way to make things suck less, we handle timer reads as early as
: possible, and only defer writes to the normal trap handling
:
: - Finally, some implementations are badly broken, and require some
: hand-holding, irrespective of NV support. So we try and reuse the NV
: infrastructure to make them usable. This could be further optimised,
: but I'm running out of patience for this sort of HW.
:
: [...]"
: .
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Document EL2 timer API
KVM: arm64: Work around x1e's CNTVOFF_EL2 bogosity
KVM: arm64: nv: Sanitise CNTHCTL_EL2
KVM: arm64: nv: Propagate CNTHCTL_EL2.EL1NV{P,V}CT bits
KVM: arm64: nv: Add trap routing for CNTHCTL_EL2.EL1{NVPCT,NVVCT,TVT,TVCT}
KVM: arm64: Handle counter access early in non-HYP context
KVM: arm64: nv: Accelerate EL0 counter accesses from hypervisor context
KVM: arm64: nv: Accelerate EL0 timer read accesses when FEAT_ECV in use
KVM: arm64: nv: Use FEAT_ECV to trap access to EL0 timers
KVM: arm64: nv: Publish emulated timer interrupt state in the in-memory state
KVM: arm64: nv: Sync nested timer state with FEAT_NV2
KVM: arm64: nv: Add handling of EL2-specific timer registers
Signed-off-by: Marc Zyngier <maz@kernel.org>
Stephen reports that 'make htmldocs' spits out a warning
("Documentation/virt/kvm/devices/vcpu.rst:147: WARNING: Definition
list ends without a blank line; unexpected unindent.").
Fix it by keeping all the timer attributes on a single line.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marc Zyngier <maz@kernel.org>
While we have sanitisation in place for the guest sysregs, we lack
that sanitisation out of reset. So some of the fields could be
evaluated and not reflect their RESx status, which sounds like
a very bad idea.
Apply the RESx masks to the the sysreg file in two situations:
- when going via a reset of the sysregs
- after having computed the RESx masks
Having this separate reset phase from the actual reset handling is
a bit grotty, but we need to apply this after the ID registers are
final.
Tested-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20250112165029.1181056-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
A lot of the NV code depends on HCR_EL2.{E2H,TGE}, and we assume
in places that at least HCR_EL2.E2H is invariant for a given guest.
However, we make a point in *not* using the sanitising accessor
that would enforce this, and are at the mercy of the guest doing
stupid things. Clearly, that's not good.
Rework the HCR_EL2 accessors to use __vcpu_sys_reg() instead,
guaranteeing that the RESx settings get applied, specially
when HCR_EL2.E2H is evaluated. This results in fewer accessors
overall.
Huge thanks to Joey who spent a long time tracking this bug down.
Reported-by: Joey Gouly <Joey.Gouly@arm.com>
Tested-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20250112165029.1181056-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix KVM selftests that check for EL0's 64bit-ness, and use a now
removed definition. Kindly point them at the new one.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently the userspace and kernel filters for guests are never set, so
no trace will be generated for them. Add support for tracing guests by
passing the desired TRFCR value to KVM so it can be applied to the
guest.
By writing either E1TRE or E0TRE, filtering on either guest kernel or
guest userspace is also supported. And if both E1TRE and E0TRE are
cleared when exclude_guest is set, that option is supported too. This
change also brings exclude_host support which is difficult to add as a
separate commit without excess churn and resulting in no trace at all.
cpu_prohibit_trace() gets moved to TRBE because the ETM driver doesn't
need the read, it already has the base TRFCR value. TRBE only needs
the read to disable it and then restore.
Testing
=======
The addresses were counted with the following:
$ perf report -D | grep -Eo 'EL2|EL1|EL0' | sort | uniq -c
Guest kernel only:
$ perf record -e cs_etm//Gk -a -- true
535 EL1
1 EL2
Guest user only (only 5 addresses because the guest runs slowly in the
model):
$ perf record -e cs_etm//Gu -a -- true
5 EL0
Host kernel only:
$ perf record -e cs_etm//Hk -a -- true
3501 EL2
Host userspace only:
$ perf record -e cs_etm//Hu -a -- true
408 EL0
1 EL2
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20250106142446.628923-8-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
For nVHE, switch the filter value in and out if the Coresight driver
asks for it. This will support filters for guests when sinks other than
TRBE are used.
For VHE, just write the filter directly to TRFCR_EL1 where trace can be
used even with TRBE sinks.
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-7-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently in nVHE, KVM has to check if TRBE is enabled on every guest
switch even if it was never used. Because it's a debug feature and is
more likely to not be used than used, give KVM the TRBE buffer status to
allow a much simpler and faster do-nothing path in the hyp.
Protected mode now disables trace regardless of TRBE (because
trfcr_while_in_guest is always 0), which was not previously done.
However, it continues to flush whenever the buffer is enabled
regardless of the filter status. This avoids the hypothetical case of a
host that had disabled the filter but not flushed which would arise if
only doing the flush when the filter was enabled.
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-6-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
trbe_drain_and_disable_local() just clears TRBLIMITR and drains.
TRBLIMITR is already cleared on the next line after this call, so
replace it with only drain. This is so we can make a kvm call that has a
preempt enabled warning from set_trbe_disabled() in the next commit,
where trbe_reset_local() is called from a preemptible hotplug path.
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-5-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Convert TRFCR to automatic generation. Add separate definitions for ELx
and EL2 as TRFCR_EL1 doesn't have CX. This also mirrors the previous
definition so no code change is required.
Also add TRFCR_EL12 which will start to be used in a later commit.
Unfortunately, to avoid breaking the Perf build with duplicate
definition errors, the tools copy of the sysreg.h header needs to be
updated at the same time rather than the usual second commit. This is
because the generated version of sysreg
(arch/arm64/include/generated/asm/sysreg-defs.h), is currently shared
and tools/ does not have its own copy.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-4-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Created with the following:
cp include/linux/kasan-tags.h tools/include/linux/
cp arch/arm64/include/asm/sysreg.h tools/arch/arm64/include/asm/
Update the tools copy of sysreg.h so that the next commit to add a new
register doesn't have unrelated changes in it. Because the new version
of sysreg.h includes kasan-tags.h, that file also now needs to be copied
into tools.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-3-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Simplify the __pkvm_host_donate_hyp() and pkvm_hyp_donate_host() paths
by not using the pkvm_mem_transition machinery. As the last users of
this, also remove all the now unused code.
No functional changes intended.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250110121936.1559655-4-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Simplify the __pkvm_host_{un}share_hyp() paths by not using the
pkvm_mem_transition machinery. As there are the last users of the
do_share()/do_unshare(), remove all the now-unused code as well.
No functional changes intended.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250110121936.1559655-3-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Simplify the __pkvm_host_{un}share_ffa() paths by using
{check,set}_page_state_range().
No functional changes intended.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250110121936.1559655-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/pkvm-fixed-features-6.14: (24 commits)
: .
: Complete rework of the pKVM handling of features, catching up
: with the rest of the code deals with it these days.
: Patches courtesy of Fuad Tabba. From the cover letter:
:
: "This patch series uses the vm's feature id registers to track the
: supported features, a framework similar to nested virt to set the
: trap values, and removes the need to store cptr_el2 per vcpu in
: favor of setting its value when traps are activated, as VHE mode
: does."
:
: This branch drags the arm64/for-next/cpufeature branch to solve
: ugly conflicts in -next.
: .
KVM: arm64: Fix FEAT_MTE in pKVM
KVM: arm64: Use kvm_vcpu_has_feature() directly for struct kvm
KVM: arm64: Convert the SVE guest vcpu flag to a vm flag
KVM: arm64: Remove PtrAuth guest vcpu flag
KVM: arm64: Fix the value of the CPTR_EL2 RES1 bitmask for nVHE
KVM: arm64: Refactor kvm_reset_cptr_el2()
KVM: arm64: Calculate cptr_el2 traps on activating traps
KVM: arm64: Remove redundant setting of HCR_EL2 trap bit
KVM: arm64: Remove fixed_config.h header
KVM: arm64: Rework specifying restricted features for protected VMs
KVM: arm64: Set protected VM traps based on its view of feature registers
KVM: arm64: Fix RAS trapping in pKVM for protected VMs
KVM: arm64: Initialize feature id registers for protected VMs
KVM: arm64: Use KVM extension checks for allowed protected VM capabilities
KVM: arm64: Remove KVM_ARM_VCPU_POWER_OFF from protected VMs allowed features in pKVM
KVM: arm64: Move checking protected vcpu features to a separate function
KVM: arm64: Group setting traps for protected VMs by control register
KVM: arm64: Consolidate allowed and restricted VM feature checks
arm64/sysreg: Get rid of CPACR_ELx SysregFields
arm64/sysreg: Convert *_EL12 accessors to Mapping
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/fpsimd.c
# arch/arm64/kvm/hyp/nvhe/pkvm.c
* kvm-arm64/pkvm-np-guest:
: .
: pKVM support for non-protected guests using the standard MM
: infrastructure, courtesy of Quentin Perret. From the cover letter:
:
: "This series moves the stage-2 page-table management of non-protected
: guests to EL2 when pKVM is enabled. This is only intended as an
: incremental step towards a 'feature-complete' pKVM, there is however a
: lot more that needs to come on top.
:
: With that series applied, pKVM provides near-parity with standard KVM
: from a functional perspective all while Linux no longer touches the
: stage-2 page-tables itself at EL1. The majority of mm-related KVM
: features work out of the box, including MMU notifiers, dirty logging,
: RO memslots and things of that nature. There are however two gotchas:
:
: - We don't support mapping devices into guests: this requires
: additional hypervisor support for tracking the 'state' of devices,
: which will come in a later series. No device assignment until then.
:
: - Stage-2 mappings are forced to page-granularity even when backed by a
: huge page for the sake of simplicity of this series. I'm only aiming
: at functional parity-ish (from userspace's PoV) for now, support for
: HP can be added on top later as a perf improvement."
: .
KVM: arm64: Plumb the pKVM MMU in KVM
KVM: arm64: Introduce the EL1 pKVM MMU
KVM: arm64: Introduce __pkvm_tlb_flush_vmid()
KVM: arm64: Introduce __pkvm_host_mkyoung_guest()
KVM: arm64: Introduce __pkvm_host_test_clear_young_guest()
KVM: arm64: Introduce __pkvm_host_wrprotect_guest()
KVM: arm64: Introduce __pkvm_host_relax_guest_perms()
KVM: arm64: Introduce __pkvm_host_unshare_guest()
KVM: arm64: Introduce __pkvm_host_share_guest()
KVM: arm64: Introduce __pkvm_vcpu_{load,put}()
KVM: arm64: Add {get,put}_pkvm_hyp_vm() helpers
KVM: arm64: Make kvm_pgtable_stage2_init() a static inline function
KVM: arm64: Pass walk flags to kvm_pgtable_stage2_relax_perms
KVM: arm64: Pass walk flags to kvm_pgtable_stage2_mkyoung
KVM: arm64: Move host page ownership tracking to the hyp vmemmap
KVM: arm64: Make hyp_page::order a u8
KVM: arm64: Move enum pkvm_page_state to memory.h
KVM: arm64: Change the layout of enum pkvm_page_state
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/arm.c
* kvm-arm64/debug-6.14:
: .
: Large rework of the debug code to make it a bit less horrid,
: courtesy of Oliver Upton. From the original cover letter:
:
: "The debug code has become a bit difficult to reason about, especially
: all the hacks and bandaids for state tracking + trap configuration.
:
: This series reworks the entire mess around using a single enumeration to
: track the state of the debug registers (free, guest-owned, host-owned),
: using that to drive trap configuration and save/restore.
:
: On top of that, this series wires most of the implementation into vCPU
: load/put rather than the main KVM_RUN loop. This has been a long time
: coming for VHE, as a lot of the trap configuration and EL1 state gets
: loaded into hardware at that point anyway.
:
: The save/restore of the debug registers is simplified quite a bit as
: well. KVM will now restore the registers for *any* access rather than
: just writes, and keep doing so until the next vcpu_put() instead of
: dropping it on the floor after the next exception."
: .
KVM: arm64: Promote guest ownership for DBGxVR/DBGxCR reads
KVM: arm64: Fold DBGxVR/DBGxCR accessors into common set
KVM: arm64: Avoid reading ID_AA64DFR0_EL1 for debug save/restore
KVM: arm64: nv: Honor MDCR_EL2.TDE routing for debug exceptions
KVM: arm64: Manage software step state at load/put
KVM: arm64: Don't hijack guest context MDSCR_EL1
KVM: arm64: Compute MDCR_EL2 at vcpu_load()
KVM: arm64: Reload vCPU for accesses to OSLAR_EL1
KVM: arm64: Use debug_owner to track if debug regs need save/restore
KVM: arm64: Remove vestiges of debug_ptr
KVM: arm64: Remove debug tracepoints
KVM: arm64: Select debug state to save/restore based on debug owner
KVM: arm64: Clean up KVM_SET_GUEST_DEBUG handler
KVM: arm64: Evaluate debug owner at vcpu_load()
KVM: arm64: Write MDCR_EL2 directly from kvm_arm_setup_mdcr_el2()
KVM: arm64: Move host SME/SVE tracking flags to host data
KVM: arm64: Track presence of SPE/TRBE in kvm_host_data instead of vCPU
KVM: arm64: Get rid of __kvm_get_mdcr_el2() and related warts
KVM: arm64: Drop MDSCR_EL1_DEBUG_MASK
Signed-off-by: Marc Zyngier <maz@kernel.org>
Merge arm64/for-next/cpufeature to solve extensive conflicts
caused by the CPACR_ELx->CPACR_EL1 repainting.
Signed-off-by: Marc Zyngier <maz@kernel.org>
The Branch Record Buffer Extension (BRBE) adds a number of system
registers and instructions which we don't currently intend to expose to
guests. Our existing logic handles this safely, but this could be
improved with some explicit handling of BRBE.
KVM currently hides BRBE from guests: the cpufeature code's
ftr_id_aa64dfr0[] table doesn't have an entry for the BRBE field, and so
this will be zero in the sanitised value of ID_AA64DFR0 exposed to
guests via read_sanitised_id_aa64dfr0_el1().
KVM currently traps BRBE usage from guests: the default configuration of
the fine-grained trap controls HDFGRTR_EL2.{nBRBDATA,nBRBCTL,nBRBIDR}
and HFGITR_EL2.{nBRBINJ_nBRBIALL} cause these to be trapped to EL2.
Well-behaved guests shouldn't try to use the registers or instructions,
but badly-behaved guests could use these, resulting in unnecessary
warnings from KVM before it injects an UNDEF, e.g.
| kvm [197]: Unsupported guest access at: 401c98
| { Op0( 2), Op1( 1), CRn( 9), CRm( 0), Op2( 0), func_read },
| kvm [197]: Unsupported guest access at: 401d04
| { Op0( 2), Op1( 1), CRn( 9), CRm( 0), Op2( 1), func_read },
| kvm [197]: Unsupported guest access at: 401d70
| { Op0( 2), Op1( 1), CRn( 9), CRm( 2), Op2( 0), func_read },
| kvm [197]: Unsupported guest access at: 401ddc
| { Op0( 2), Op1( 1), CRn( 9), CRm( 1), Op2( 0), func_read },
| kvm [197]: Unsupported guest access at: 401e48
| { Op0( 2), Op1( 1), CRn( 9), CRm( 1), Op2( 1), func_read },
| kvm [197]: Unsupported guest access at: 401eb4
| { Op0( 2), Op1( 1), CRn( 9), CRm( 1), Op2( 2), func_read },
| kvm [197]: Unsupported guest access at: 401f20
| { Op0( 2), Op1( 1), CRn( 9), CRm( 0), Op2( 2), func_read },
| kvm [197]: Unsupported guest access at: 401f8c
| { Op0( 1), Op1( 1), CRn( 7), CRm( 2), Op2( 4), func_write },
| kvm [197]: Unsupported guest access at: 401ff8
| { Op0( 1), Op1( 1), CRn( 7), CRm( 2), Op2( 5), func_write },
As with other features that we know how to handle, these warnings aren't
particularly interesting, and we can simply treat these as UNDEFINED
without any warning. Add the necessary fine-grained undef configuration
to make this happen, as suggested by Marc Zyngier:
https://lore.kernel.org/linux-arm-kernel/86r0czk6wd.wl-maz@kernel.org/
At the same time, update read_sanitised_id_aa64dfr0_el1() to hide BRBE
from guests, as we do for SPE. This will prevent accidentally exposing
BRBE to guests if/when ftr_id_aa64dfr0[] gains a BRBE entry.
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250109223836.419240-1-robh@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Refactor nvhe stack code to use NVHE_STACK_SIZE/SHIFT constants,
instead of directly using PAGE_SIZE/SHIFT. This makes the code a bit
easier to read, without introducing any functional changes.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Link: https://lore.kernel.org/r/20241112003336.1375584-1-kaleshsingh@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The hypervisor VA space size depends on both the ID map's
(IDMAP_VA_BITS) and the kernel stage-1 (VA_BITS). However, the
hypervisor stacktrace decoding is solely relying on VA_BITS. This is
especially an issue when VA_BITS < IDMAP_VA_BITS (i.e. VA_BITS is
39-bit): the hypervisor may have addresses bigger than the stacktrace is
masking.
Align this mask with hyp_va_bits.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250107112821.416591-1-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Make sure we do not trap access to Allocation Tags.
Fixes: b56680de9c ("KVM: arm64: Initialize trap register values in hyp in pKVM")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20250106112421.65355-1-vladimir.murzin@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Commit 5053c3f051 ("KVM: arm64: Use hVHE in pKVM by default on CPUs with
VHE support") modified the behaviour of "kvm-arm.mode=protected" without
the updating the kernel parameters doc.
Update it to match the current implementation.
Also, update required architecture version for nested virtualization as
suggested by Marc.
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20241025093259.2216093-1-smostafa@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
It appears that on Qualcomm's x1e CPU, CNTVOFF_EL2 doesn't really
work, specially with HCR_EL2.E2H=1.
A non-zero offset results in a screaming virtual timer interrupt,
to the tune of a few 100k interrupts per second on a 4 vcpu VM.
This is also evidenced by this CPU's inability to correctly run
any of the timer selftests.
The only case this doesn't break is when this register is set to 0,
which breaks VM migration.
When HCR_EL2.E2H=0, the timer seems to behave normally, and does
not result in an interrupt storm.
As a workaround, use the fact that this CPU implements FEAT_ECV,
and trap all accesses to the virtual timer and counter, keeping
CNTVOFF_EL2 set to zero, and emulate accesses to CVAL/TVAL/CTL
and the counter itself, fixing up the timer to account for the
missing offset.
And if you think this is disgusting, you'd probably be right.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Inject some sanity in CNTHCTL_EL2, ensuring that we don't handle
more than we advertise to the guest.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-11-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Allow a guest hypervisor to trap accesses to CNT{P,V}CT_EL02 by
propagating these trap bits to the host trap configuration.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-10-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
For completeness, fun, and cerebral meltdown, add the virtualisation
related traps to the counter and timers.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-9-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We already deal with CNTPCT_EL0 accesses in non-HYP context.
Let's add CNTVCT_EL0 as a good measure.
This is also an opportunity to simplify things and make it
plain that this code is only for non-HYP context handling.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-8-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Similarly to handling the physical timer accesses early when FEAT_ECV
causes a trap, we try to handle the physical counter without returning
to the general sysreg handling.
More surprisingly, we introduce something similar for the virtual
counter. Although this isn't necessary yet, it will prove useful on
systems that have a broken CNTVOFF_EL2 implementation. Yes, they exist.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-7-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Although FEAT_ECV allows us to correctly emulate the timers, it also
reduces performances pretty badly.
Mitigate this by emulating the CTL/CVAL register reads in the
inner run loop, without returning to the general kernel.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Although FEAT_NV2 makes most things fast, it also makes it impossible
to correctly emulate the timers, as the sysreg accesses are redirected
to memory.
FEAT_ECV addresses this by giving a hypervisor the ability to trap
the EL02 sysregs as well as the virtual timer.
Add the required trap setting to make use of the feature, allowing
us to elide the ugly resync in the middle of the run loop.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
With FEAT_NV2, the EL0 timer state is entirely stored in memory,
meaning that the hypervisor can only provide a very poor emulation.
The only thing we can really do is to publish the interrupt state
in the guest view of CNT{P,V}_CTL_EL0, and defer everything else
to the next exit.
Only FEAT_ECV will allow us to fix it, at the cost of extra trapping.
Suggested-by: Chase Conklin <chase.conklin@arm.com>
Suggested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Emulating the timers with FEAT_NV2 is a bit odd, as the timers
can be reconfigured behind our back without the hypervisor even
noticing. In the VHE case, that's an actual regression in the
architecture...
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add the required handling for EL2 and EL02 registers, as
well as EL1 registers used in the E2H context. This includes
handling the virtual timer accesses when CNTHCTL_EL2.EL1TVT
or CNTHCTL_EL2.EL1TVCT are set.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
