On a5xx and a6xx devices that are using CP_WHERE_AM_I to update a
ringbuffer read-ptr shadow value, periodically emit a CP_WHERE_AM_I
every 32 commands, so that a later submit waiting for ringbuffer
space to become available sees partial progress, rather than not
seeing rptr advance at all until the GPU gets to the end of the
submit that it is currently chewing on.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210428193654.1498482-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
This patch adds support for the gpu found in the Snapdragon 7c Gen 3
compute platform. This gpu is similar to the exisiting a660 gpu with
minor delta in the programing sequence. As the Adreno GPUs are moving
away from a numeric chipid based naming scheme to a string, it was
decided to use 0x06030500 as the chip id of this gpu to communicate
to the userspace driver.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210730011945.v4.3.I610377db0934b6b7deda532ec2bf786a02c38c01@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
No idea why we were still using this. It certainly hasn't been needed
for some time. So drop the pointless twin codepaths.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20210728010632.2633470-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Before we start adding more cleverness, split it into it's own file.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210726144653.2180096-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Wire up support to stall the SMMU on iova fault, and collect a devcore-
dump snapshot for easier debugging of faults.
Currently this is a6xx-only, but mostly only because so far it is the
only one using adreno-smmu-priv.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210610214431.539029-6-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use the new adreno-smmu-priv fault info function to get more SMMU
debug registers and print the current TTBR0 to debug per-instance
pagetables and figure out which GPU block generated the request.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add adreno_is_{a660,a650_family} helpers and convert update existing
adreno_is_a650 usage based on downstream driver's logic (changing into
adreno_is_a650_family or adding adreno_is_a660).
And add the remaining changes required for A660, again based on
the downstream driver: missing GMU allocations, additional register init,
dummy hfi BW table, cp protect list, entry in gpulist table, hwcg table,
updated a6xx_ucode_check_version check.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210608172808.11803-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Based on mesa commit daa2ccff7a0201941db3901780d179e2634057d5
Small bit of .c churn in the phy code to adapt to split up of phy
related registers.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use resource-managed OPP API to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314163408.22292-12-digetx@gmail.com
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
msm_gem_get_vaddr() currently always maps as writecombine, so use the right
flag instead of relying on broken behavior (things don't actually work if
they are mapped as uncached).
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210423190833.25319-3-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
If a6xx_hw_init() fails before creating the shadow_bo, the a6xx_pm_suspend
code referencing it will crash. Change the condition to one that avoids
this problem (note: creation of shadow_bo is behind this same condition)
Fixes: e8b0b994c3 ("drm/msm/a6xx: Clear shadow on suspend")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Value was shifted in the wrong direction, resulting in the field always
being zero, which is incorrect for A650.
Fixes: d0bac4e9cd ("drm/msm/a6xx: set ubwc config for A640 and A650")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-4-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Update CP_PROTECT register programming based on downstream.
A6XX_PROTECT_RW is renamed to A6XX_PROTECT_NORDWR to make things aligned
and also be more clear about what it does.
Note that this required switching to use the CP_ALWAYS_ON_COUNTER as the
GMU counter is not accessible from the cmdstream. Which also means
using the CPU counter for the msm_gpu_submit_flush() tracepoint (as
catapult depends on being able to compare this to the start/end values
captured in cmdstream). This may need to be revisited when IFPC is
enabled.
Also, compared to downstream, this opens up CP_PERFCTR_CP_SEL as the
userspace performance tooling (fdperf and pps-producer) expect to be
able to configure the CP counters.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210513171431.18632-5-jonathan@marek.ca
[switch to CP_ALWAYS_ON_COUNTER, open up CP_PERFCNTR_CP_SEL, and spiff
up commit msg]
Signed-off-by: Rob Clark <robdclark@chromium.org>
mmu500 targets don't have a "cx_mem" region, set llc_mmio to NULL in that
case to avoid the IS_ERR() condition in a6xx_llc_activate().
Fixes: 3d247123b5 ("drm/msm/a6xx: Add support for using system cache on MMU500 based targets")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210424014927.1661-1-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
I suppose the microcode version check for a650 is incorrect. It checks
for the version 1.95, while the firmware released have major version of 0:
0.91 (vulnerable), 0.99 (fixing the issue).
Lower version requirements to accept firmware 0.99.
Fixes: 8490f02a3c ("drm/msm: a6xx: Make sure the SQE microcode is safe")
Cc: Akhil P Oommen <akhilpo@codeaurora.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Message-Id: <20210331140223.3771449-1-dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
They were reading a counter that was configured to ALWAYS_COUNT (ie.
cycles that the GPU is doing something) rather than ALWAYS_ON. This
isn't the thing that userspace is looking for.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Message-Id: <20210325012358.1759770-2-robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Commit 7bf168c8fe ("drm/msm: Fix speed-bin support not to
access outside valid memory"), reworked the nvmem reading of
"speed_bin", but in doing so dropped handling of the -ENOENT
case which was previously documented as "fine".
That change resulted in the db845c board display to fail to
start, with the following error:
adreno 5000000.gpu: [drm:a6xx_gpu_init] *ERROR* failed to read speed-bin (-2). Some OPPs may not be supported by hardware
Thus, this patch simply re-adds the ENOENT handling so the lack
of the speed_bin entry isn't fatal for display, and gets things
working on db845c.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Reported-by: YongQin Liu <yongqin.liu@linaro.org>
Fixes: 7bf168c8fe ("drm/msm: Fix speed-bin support not to access outside valid memory")
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Message-Id: <20210330013408.2532048-1-john.stultz@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
When running the latest kernel on an sc7180 with KASAN I got this
splat:
BUG: KASAN: slab-out-of-bounds in a6xx_gpu_init+0x618/0x644
Read of size 4 at addr ffffff8088f36100 by task kworker/7:1/58
CPU: 7 PID: 58 Comm: kworker/7:1 Not tainted 5.11.0+ #3
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
Workqueue: events deferred_probe_work_func
Call trace:
dump_backtrace+0x0/0x3a8
show_stack+0x24/0x30
dump_stack+0x174/0x1e0
print_address_description+0x70/0x2e4
kasan_report+0x178/0x1bc
__asan_report_load4_noabort+0x44/0x50
a6xx_gpu_init+0x618/0x644
adreno_bind+0x26c/0x438
This is because the speed bin is defined like this:
gpu_speed_bin: gpu_speed_bin@1d2 {
reg = <0x1d2 0x2>;
bits = <5 8>;
};
As you can see the "length" is 2 bytes. That means that the nvmem
subsystem allocates only 2 bytes. The GPU code, however, was casting
the pointer allocated by nvmem to a (u32 *) and dereferencing. That's
not so good.
Let's fix this to just use the nvmem_cell_read_u16() accessor function
which simplifies things and also gets rid of the splat.
Let's also put an explicit conversion from little endian in place just
to make things clear. The nvmem subsystem today is assuming little
endian and this makes it clear. Specifically, the way the above sc7180
cell is interpreted:
NVMEM:
+--------+--------+--------+--------+--------+
| ...... | 0x1d3 | 0x1d2 | ...... | 0x000 |
+--------+--------+--------+--------+--------+
^ ^
msb lsb
You can see that the least significant data is at the lower address
which is little endian.
NOTE: someone who is truly paying attention might wonder about me
picking the "u16" version of this accessor instead of the "u8" (since
the value is 8 bits big) or the u32 version (just for fun). At the
moment you need to pick the accessor that exactly matches the length
the cell was specified as in the device tree. Hopefully future
patches to the nvmem subsystem will fix this.
Fixes: fe7952c629 ("drm/msm: Add speed-bin support to a618 gpu")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Most a6xx targets have security issues that were fixed with new versions
of the microcode(s). Make sure that we are booting with a safe version of
the microcode for the target and print a message and error if not.
v2: Add more informative error messages and fix typos
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Now that we're not racing with GPU setup, also fix races of timestamps
against other timestamps. In freedreno CI, we were seeing this path trigger
timeouts on setting the GMU bit, producing:
[drm:_a6xx_gmu_set_oob] *ERROR* Timeout waiting for GMU OOB set GPU_SET: 0x0
and this triggered especially on the first set of tests right after
boot (it's probably easier to lose the race than one might think,
given that we start many tests in parallel, and waiting for NFS to
page in code probably means that lots of tests hit the same point of
screen init at the same time). As of this patch, the message seems to
have completely gone away.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
We were using the same force-poweron bit in the two codepaths, so they
could race to have one of them lose GPU power early.
freedreno CI was seeing intermittent errors like:
[drm:_a6xx_gmu_set_oob] *ERROR* Timeout waiting for GMU OOB set GPU_SET: 0x0
and this issue could have contributed to it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
A6XX GPUs have support for last level cache(LLC) also known
as system cache and need to set the bus attributes to
use it. Currently we use a generic adreno iommu address space
implementation which are also used by older GPU generations
which do not have LLC and might introduce issues accidentally
and is not clean in a way that anymore additions of GPUs
supporting LLC would have to be guarded under ifdefs. So keep
the generic code separate and make the address space creation
A6XX specific. We also have a helper to set the llc attributes
so that if the newer GPU generations do support them, we can
use it instead of open coding domain attribute setting for each
GPU.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Domain attribute setting for LLCC is guarded by !IS_ERR
check which works fine only when CONFIG_QCOM_LLCC=y but
when it is disabled, the LLCC apis return NULL and that
is not handled by IS_ERR check. Due to this, domain attribute
for LLCC will be set even on GPUs which do not support it
and cause issues, so correct this by using IS_ERR_OR_NULL
checks appropriately. Meanwhile also cleanup comment block
and remove unwanted blank line.
Fixes: 00fd44a1a4 ("drm/msm: Only enable A6xx LLCC code on A6xx")
Fixes: 474dadb8b0 ("drm/msm/a6xx: Add support for using system cache(LLC)")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some GPUs support different max frequencies depending on the platform.
To identify the correct variant, we should check the gpu speedbin
fuse value. Add support for this speedbin detection to a6xx family
along with the required fuse details for a618 gpu.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
GPU targets with an MMU-500 attached have a slightly different process for
enabling system cache. Use the compatible string on the IOMMU phandle
to see if an MMU-500 is attached and modify the programming sequence
accordingly.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The last level system cache can be partitioned to 32 different
slices of which GPU has two slices preallocated. One slice is
used for caching GPU buffers and the other slice is used for
caching the GPU SMMU pagetables. This talks to the core system
cache driver to acquire the slice handles, configure the SCID's
to those slices and activates and deactivates the slices upon
GPU power collapse and restore.
Some support from the IOMMU driver is also needed to make use
of the system cache to set the right TCR attributes. GPU then
has the ability to override a few cacheability parameters which
it does to override write-allocate to write-no-allocate as the
GPU hardware does not benefit much from it.
DOMAIN_ATTR_IO_PGTABLE_CFG is another domain level attribute used
by the IOMMU driver for pagetable configuration which will be used
to set a quirk initially to set the right attributes to cache the
hardware pagetables into the system cache.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
[saiprakash.ranjan: fix to set attr before device attach to iommu and rebase]
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/adreno/a6xx_gpu.c:33:6: warning: no previous prototype for ‘a6xx_idle’ [-Wmissing-prototypes]
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Clear the shadow rptr on suspend. Otherwise, when we resume, we can
have a stale value until CP_WHERE_AM_I executes. If we suspend near
the ringbuffer wraparound point, this can lead to a chicken/egg
situation where we are waiting for ringbuffer space to write the
CP_WHERE_AM_I (or CP_INIT) packet, because we mistakenly believe that
the ringbuffer is full (due to stale rptr value in the shadow).
Fixes errors like:
[drm:adreno_wait_ring [msm]] *ERROR* timeout waiting for space in ringbuffer 0
in the resume path.
Fixes: d3a569fccf ("drm/msm: a6xx: Use WHERE_AM_I for eligible targets")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Before adding another lock, give ring->lock a more descriptive name.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The microcode bo's should never be madvise(WONTNEED), so these should
not be using msm_gem_get_vaddr_active().
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
* DSI support for sm8150/sm8250
* Support for per-process GPU pagetables (finally!) for a6xx.
There are still some iommu/arm-smmu changes required to
enable, without which it will fallback to the current single
pgtable state. The first part (ie. what doesn't depend on
drm side patches) is queued up for v5.10[1].
* DisplayPort support. Userspace DP compliance tool support
is already merged in IGT[2]
* The usual assortment of smaller fixes/cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvqjuzH=Po_9EzzFsp2Xq3tqJUTKfsA2g09XY7_+6Ypfw@mail.gmail.com
Commit 604234f336 ("drm/msm: Enable expanded apriv support for a650")
was checking the result of adreno_is_a650() before the gpu revision
got probed in adreno_gpu_init() so it was always coming across as
false. Snoop into the revision ID ahead of time to correctly set the
hw_apriv flag so that it can be used by msm_gpu to properly setup
global buffers.
Fixes: 604234f336 ("drm/msm: Enable expanded apriv support for a650")
Reported-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
As newer GPU families are added it makes less sense to maintain a
"generic" version functions for older families. Move adreno_submit()
and get_rptr() into the target specific code for a2xx, a3xx and a4xx.
Add a parameter to adreno_flush to pass the target specific WPTR register
instead of relying on the generic register.
All of this gets rid of the last of the REG_ADRENO offsets so remove all
all the register definitions and infrastructure.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Support the WHERE_AM_I opcode for the A618, A630 and A640 GPUs if the
microcode supports it. The WHERE_AM_I opcode allows the RPTR shadow
to be updated in priviliged memory which protects the shadow from being
read or written from user submissions.
A650 already supports extended APRIV have built in hardware support for
to access privilged memory from the CP and can go back to using the
hardware RPTR shadow feature.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add support for using per-instance pagetables if all the dependencies are
available.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Now that we can get the ctx from the submitqueue, the extra arg is
redundant.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[split out of previous patch to reduce churny noise]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
A few fixes for a potential RPTR corruption issue.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvnr6Nhz2J0sjv2G+j7iceVtaDiJDT8T88uW6jiBfOGKQ@mail.gmail.com
Disable the RPTR shadow across all targets. It will be selectively
re-enabled later for targets that need it.
Cc: stable@vger.kernel.org
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
a650 supports expanded apriv support that allows us to map critical buffers
(ringbuffer and memstore) as as privileged to protect them from corruption.
Cc: stable@vger.kernel.org
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Initialize hardware clock-gating registers on A640 and A650 GPUs.
At least for A650, this solves some performance issues.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This will allow supporting different hwcg tables for a6xx.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This is required for A640 and A650 to be able to share UBWC-compressed
images with other HW such as display, which expect this configuration.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
